说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 锥轮
1)  cone wheel
锥轮
1.
Because the stepless gearshift mechanism with two cone wheels and a friction disk wheel has such advantages as transmission being stable, low noise, simple configuration, various forms and avoidable damage of elements with overload sliding, it has been widely used in actual practice, especially in precision machines and instruments.
由于锥轮—摩擦盘轮—锥轮无级变速传动机构(简称锥轮变速机构)具有传动平稳、噪音很小、结构简单、过载打滑(可避免部件受损)、形式多样等优点,所以在实际传动中,特别是在精密机械与仪器中得到了广泛的应用[1],然而至今尚未见到计算锥轮变速机构传动比的专用公式。
2)  bevel gear shaft
锥齿轮轴
1.
Welding repair of bevel gear shaft of 17CrNiMo6 steel alloy;
17CrNiMo6钢锥齿轮轴焊接修复
3)  bevel gear
锥齿轮
1.
Study on Intervention in Normal Circular-arc Bevel Gears Processing;
法向圆弧锥齿轮加工干涉研究
2.
Study on intervention in milling normal circular-arc bevel gears;
铣削加工法向圆弧锥齿轮的干涉研究
3.
Structure of forming die for preparing high strength PM bevel gears;
粉末冶金高强度锥齿轮成形模具结构
4)  conical wheel
锥面砂轮
1.
A design method for gear grinding machine with conical wheel based on function modularization;
基于功能模块化的锥面砂轮磨齿机设计方法
2.
According to the working principle of gear grinding with generating method and meshing theory of gears,the validity of involute helicoid grinding with conical wheel gear grinding machine was proved with normal method of tooth profile,where the equations of tooth profile and involute helicoid were concerned.
根据展成法磨齿工作原理和齿轮啮合原理,利用齿形法线法,从齿形方程和渐开螺旋面两个方面对锥面砂轮磨齿机正确磨削斜齿圆柱齿轮渐开螺旋面进行了理论验证,该验证方法及推导过程有助于理解采用齿条形刀具磨削齿轮的原理,同时为该加工方法提供了相应的理论基础。
3.
According to the working principle of conical wheel gear grinding machine and meshing theory of gears,the involute helicoid grinding with conical wheel gear grinding machine is proved with normal of tooth profile method,which include equations of tooth profile and involute helicoid.
文章根据锥面砂轮磨齿机工作原理和齿轮啮合原理,利用齿形法线法,从齿形方程和渐开螺旋面两个方面对锥面砂轮磨齿机正确磨削斜齿圆柱齿轮渐开螺旋面进行了理论验证,该验证方法及推导过程有助于理解采用齿条形刀具磨削齿轮的原理,同时对提高磨齿加工精度具有理论指导意义。
5)  bevel gear
圆锥齿轮
1.
Design of bevel gear forgings and Developing of SolidWorks;
基于Solid Works的圆锥齿轮精锻件的二次开发
2.
Optical design of flashed cold die forging of car used bevel gear;
轿车圆锥齿轮闭式冷精锻凹模的优化设计
3.
Simulation and creating model of straight bevel gear;
直齿圆锥齿轮的建模和运动仿真
6)  cone gear
圆锥齿轮
1.
The Adjustment for the Clearance of the Helix Cone Gear Mesh Side for the Reducer and the Clearance of Paired Cone Roller Bearings;
减速机螺旋圆锥齿轮啮合侧间隙及成对圆锥滚子轴承间隙调整
2.
The influence of the load distributing in the tooth direction and the superposition degree of cone gear on the transmission;
圆锥齿轮的齿向载荷分布和重合度对传动的影响
3.
Measures to control heat treatment distortion of the cone gears were tested and analyzed.
对如何控制圆锥齿轮热处理畸变进行了试验和分析 ,结果表明 ,通过改变装炉的方式、淬火方法和控制冷却 ,能有效地控制齿轮的畸变 ,解决了生产中的关键问
补充资料:梵轮法轮同异
【梵轮法轮同异】
 (术语)智度论二十五曰:“问曰:佛或时名法轮,或时名梵轮,有何等异?答曰:说梵轮法轮无异。复次,有人言:说梵轮者,现四无量心,说法轮者,示四谛法。复次,梵轮因四无量心得道,是名梵轮,依余法得道,是名法轮。梵轮示四禅,法轮示三十七品。梵轮示修禅定圣道,法轮示修智慧圣道。”
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条