说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 厚度衰减
1)  The weaker the thicker
厚度衰减
2)  CAT
套管衰减厚度
3)  amplitude attenuation
幅度衰减
1.
This article analyzed different reason for the amplitude attenuation of the acoustic emission,and used the AE testing device produced by PAC America to test the acoustic emission attenuation using a pipe with many complex features.
分析了引起声发射信号衰减的各种原因,采用美国PAC公司的声发射仪,对一个复杂特征管道中声发射信号的幅度衰减情况进行了试验测量,得出了不同管道特征对声发射信号幅度的衰减影响的结论,并提出相关的建议。
4)  stiffness reduction
刚度衰减
1.
A complete parabolic shear lag analysis containing delamination damage induced by transverse cracks was therefore proposed and applied to predict the stiffness reduction by transverse cracking of materials.
并依此模型对材料刚度衰减进行了计算 ,并与不包含分层损伤的完全抛物线模型及不完全的线模型进行了比较 。
5)  stiffness degradation
刚度衰减
1.
A new stiffness degradation model and test methods were introduced.
采用叠层的增量本构关系 ,模拟层合板壳结构的损伤过程 ,建立了损伤后刚度衰减模型及刚度退化准则 ,并通过实验确定了刚度衰减系数。
2.
As an example, the stiffness degradation for cracked(- θ m/90/+θ m ) S laminates is studied.
本文作者对含非正交各向异性铺层的约束开裂复合材料层板,提出用分解刚度的方法建立本构关系;给出分解后耦合问题的控制微分方程;作为特例,研究了(-θm/90n/θm)S开裂层板的刚度衰减。
6)  strength degradation
强度衰减
1.
An approach to estimate fatigue life of concrete based on residual strength degradation;
基于剩余强度衰减的混凝土疲劳寿命估算方法
2.
The study confirmes that the long_term failure of ceramics is due to the strength degradation that can be caused by various factors.
认为长期失效的本质是强度衰减 ,建立了一个疲劳失效的强度衰减模型和提出了寿命预测方法 。
3.
It is universally acknowledged that soil strength degradation and creep under water-Absorption are main factors of startup of landslide.
土体吸水蠕变强度衰减是散体滑坡演绎启动的根本原因,以巫山冯家坝滑坡为例,由室内试验得到不同饱和度下松散土体的物理力学参数,应用大型有限元数值模拟软件ANSYS,研究了降雨条件下散体滑坡的演变趋势。
补充资料:板带厚度测量


板带厚度测量
thickness measurement of plate and strip

  bondai houdu eeliang板带厚度测量(thiekness measurement ofpfate and strip)指板带厚度尺寸的在线实时测量。这是提高成品率,保证板带材产品质量的重要措施,是实现生产过程自动化不可缺少的重要环节。(见厚度自动挂制) 板带厚度的在线测量可分为接触式测量和非接触式测量两类。接触式测量按工作原理分为电感式、差动变压器式、角位移式、磁栅式等。非接触式测量按工作原理分为射线式、微波式、激光式、气动式、涡流式等。在生产过程中,选用哪种测量方式,取决于板带的材质和生产过程工艺所提出的技术要求。非接触式测量得到广泛采用。 中国在2。世纪50年代开始对测厚仪进行了研究,现在已有了各种类型的测厚仪,对轧制生产线的自动控制起了很大的促进作用。各种类型测厚方法的仪器、应用范围和产地如表所列。 各种测厚仪器的性能、特点和应用扭李 (李由婉)
  
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条