说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 辨识系统
1)  identification system
辨识系统
1.
Using this method, a damage identification system of reinforced concrete board structure is set up, and the results of identification show that the system is available.
阐述了利用神经网络建立结构损伤辨识系统的过程 ,并对系统建立过程中训练样本的选取和预处理问题进行了说明。
2)  system identification
系统辨识
1.
Sine wave sweep control for wideband jumbo-size vibration system based on system identification;
基于系统辨识的宽频大尺寸振动台正弦扫频控制
2.
Fast recursive least square scheme for time-varying nonlinear structural system identification based on feed forward neural network;
基于前向神经网络的时变非线性结构系统辨识快速递推最小二乘法
3.
Modified variable step size LMS algorithm and its application in system identification;
一种改进变步长LMS算法及其在系统辨识中的应用
3)  identification [英][aɪ,dentɪfɪ'keɪʃn]  [美][aɪ'dɛntəfə'keʃən]
系统辨识
1.
Computer Identification for System Based on MATLAB;
基于MATLAB语言的系统辨识
2.
Study on Identification and Self-Tuning Control of the 1370 Cold Strip Rolling Mill Gauge Control System;
1370冷轧机厚控系统辨识与自校正控制研究
3.
Identification of Dual-rate Systems with Fast Input and Very Slow Output;
基于甚慢输出采样的双速率系统辨识
4)  system identify
系统辨识
1.
A new method of system identify based on self-adapt and fuzzy system radial based Gaussian function is described.
提出了一种基于自适应模糊系统的径向基高斯函数系统辨识方法,与传统的系统辨识和仿真方法相比,更具有精确性与智能性。
2.
The system identify is completed and the result is perfect.
文章研究基于PID神经网络的多变量非线性动态系统辨识问题。
5)  system recognition
系统辨识
1.
Methods The isotope tracking technique was applied to mark the blood and record the dynamic curves of cerebral blood flow changes under various accelerations, and the relevant mathematical model was set up using the method of system recognition.
方法 用同位素示踪技术标记血液,记录在不同加速度作用下的脑血容动态变化曲线,用系统辨识方法建立相应的数学模型。
2.
Based on the idea of system recognition,a new approach for analog circuit fault iagnosis is developed in this paper.
本文基于系统辨识的思想,对模拟电路故障诊断提出了一种新的方法。
3.
The modeling based on the system recognition theory and using the least square method in the case of the partially linear relationship the simulation precision is greatly improved.
对于局部线性的水位流量关系,用系统辨识理论对其进行建模,利用最小二乘法,拟合精度明显提高。
6)  systems identification
系统辨识
补充资料:闭环系统辨识
      在闭环条件下确定开环系统(或正向通道)的动态特性。一般的系统辨识方法都是针对开环控制系统的,对于闭环控制系统的辨识,主要是指根据闭环操作所得到的数据,在什么条件下可以辨识和如何辨识系统的正向通道参数的问题。稳定的闭环系统对于不同反馈作用的输入信号可能有几乎相同的输出信号,因此闭环系统的输入和输出数据所提供的信息比开环的少。这给辨识带来一定困难。另外,在开环系统中,输入和输出所受到的干扰是互相独立的;而在闭环系统中,由于反馈的作用,输入总是与输出噪声相关的,这就给辨识带来更大的困难,有时甚至不能辨识。对于闭环系统,在很多情况下不允许把反馈断开后再对正向通道进行辨识。因为切断反馈,系统便成为开环而不稳定,甚至出现危险(例如一些化工系统就是这样)。有时为了高产、优质和保密等原因也必须保留反馈。还有很多系统,反馈是系统本身所固有的,根本不能消除,例如社会、经济和生物等系统。
  
  图1是一个闭环控制系统,其中w是设定值干扰,u和y分别是系统的输入和输出,它们都是可以测量的,ε1和ε2分别是正向通道和反馈回路的噪声,GS和GR分别是系统开环的和反馈回路的传递函数,G1和G2分别是正向通道和反馈回路噪声的传递函数。闭环系统辨识就是用 w、u和y的测量值来确定系统开环的传递函数GS。用一般的系统辨识方法,通过w和y的测量值可以对整个闭环系统进行辨识而得到闭环系统的传递函数,通过u和y的测量值得到的开环传递函数GS误差比较大,因为这时输入u和噪声ε1不是统计独立的,而独立性是无偏估计(见参数估计)的充分条件。当w=0和ε2 =0时,图1变为图2,对于这样的闭环系统,用u和y的测量值不能得到真实的开环系统传递函数GS,而只能得到GS的一个估计:。  闭环系统辨识的关键是保证输入u与噪声的统计独立性和保证GS的唯一性。70年代中期以来闭环系统辨识取得一些重要的结果:①在有反馈噪声的情况下,如果ε1和ε2统计独立,则用u和y的测量值可以辨识出GS与GR;如果ε1和ε2不是统计独立的,则GS和GR 没有唯一解。②在没有反馈噪声的情况下,如果GR已知,w≠0,而且w与ε1统计独立,则由u和y的测量值可以得到 GS的正确解;如果w =0(图2),则在一定条件下,闭环系统也是可辨识的。
  
  参考书目
   哥德温、潘恩著,张永光、袁震东译:《动态系统辨识:试验设计与数据分析》,科学出版社,北京,1983。(G. C. Goodwin and R. L. Payne, Dynamic System Identification: Experiment Design and Data Analysis, Academic Press, 1977.)

  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条