1) steam-pressed aereted concrete
蒸压加气砼
2) autoclaved aerated
蒸压加气
1.
Currently,during the construction of autoclaved aerated concrete building blocks\' wall body,mortar joint usually cracks,exist hollowness and leakage,and sound proof effect reduces.
目前,使用蒸压加气混凝土砌块施工常出现灰缝开裂、抹灰层开裂、空鼓、渗漏、隔声效果降低等问题,因此寻找有效的控制手段并确保其施工质量成为墙体施工的重点。
3) aerated concrete
加气砼
1.
The paper introduced the application of aerated concrete block to large span arch bridge spandrel fill,discussed the technology and main characteristics of aerated concrete.
通过介绍蒸气粉煤灰加气砼在晋焦高速公路丹河特大跨径石拱桥的应用 ,系统探讨了加气砼的生产工艺、主要特性等 ,表明加气砼用作拱桥腹拱填料 ,可减轻自重 ,改善结构受力。
2.
The automatic control system for pour moulding process in aerated concrete production is particular introduced based on paper A fuzzy compensation algorithm is presented for the accuracy problem in measuring mortar.
在文 [1]的基础上 ,详细介绍了加气砼生产浇注过程自动控制的相关问题。
3.
A set of distributed control system (DCS) in aerated concrete production is introduced.
结合我国加气砼生产的现状 ,介绍一套加气砼生产线集散控制系统 ,该系统采用以太网结构 ,实现了加气砼生产过程的全线自动控制。
4) autoclaved aerated concrete
蒸压加气混凝土
1.
To reveal the complicated stress state of masonry structure in project and the effect of normal stress on shearing behavior,failure form and shearing strength,the shearing strength was obtained through experiments on 54 pieces of minitype sand-lime autoclaved aerated concrete(AAC) masonry subjected to different normal stress.
为了解砌体结构在实际工程中所处的剪压复合的复杂受力状态,作用在砌体上的正应力对砌体的抗剪性能、砌体的剪切破坏形态及其对砌体抗剪强度的影响,对54个小型灰砂蒸压加气混凝土砌体进行静力抗剪试验,通过施加不同的正应力得到相应的抗剪强度;分析其破坏机理,归纳得出剪摩、剪压、斜压等破坏形态,并与砖砌体的破坏形态进行比较;根据试验结果回归分析得到灰砂蒸压加气混凝土砌体的静力剪压相关性曲线,与砖砌体的剪压相关性曲线进行对比分析,得到两者的异同;在静力剪压相关性曲线的基础上,依据变摩擦系数的剪摩理论,提出灰砂蒸压加气混凝土砌体静力抗剪强度的建议公式,并对摩擦系数进行了简化。
2.
Although autoclaved aerated concrete is applied widely,the walls built by the blocks are easy to entangle in common quality defects owing to neglecting monitor of moisture content,which has a strong impact on its market reputation.
蒸压加气混凝土应用虽广泛,由于忽视监控含水率,所砌墙体极易产生质量通病,严重影响到市场声誉。
5) repressuring of gasoline
增加汽油蒸气压
6) impressed vapour pressure
外加蒸气压力
补充资料：呼气末正压(加压)呼吸
呼气末正压(加压)呼吸
加压
指经气管导管(包括气管造口)向气道进行控制呼吸(无自主呼吸)时的呼气末正压方法。目的是借助呼气末正压的顶托以保持呼气终末小气道的开放，使二氧化碳能顺利排出。适用于急性肺水肿及急性呼吸窘迫综合征时的呼吸治疗。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条