说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 喷雾造粒ZrO2粉料
1)  ZrO2 spray-dried powder
喷雾造粒ZrO2粉料
2)  powders by spray pelletization
喷雾造粒粉体
3)  spray pelletization
喷雾造粒
1.
Sintering behavior of white carbon black particles by spray pelletization;
喷雾造粒白炭黑微球的烧结行为
2.
In order to improve the properties of the SiO2 particles by spray pelletization, the influences of heat treatment process on the apparent density, flowability and size distribution of the SiO2 particles were studied.
研制了一种以SiO2为基体的高温可磨耗封严涂层,为了改善二氧化硅喷雾造粒粉体的性能,研究了热处理工艺对粉体松装密度、流动速度及粒度分布的影响。
3.
The effect of SiC slurry solid content and spray drying technique on the character of spray pelletization powders was investigated.
以水为液体介质,制备分散稳定的水基SiC料浆,并利用喷雾造粒技术对水基SiC浆料进行造粒,研究了碳化硅浆料固含量及喷雾干燥工艺对造粒粉特性的影响。
4)  spray granulation
喷雾造粒
1.
Research progress of fluidized-bed spray granulation;
流化床喷雾造粒的研究进展
2.
Study on slurry for spray granulation in manufacturing NiZn ferrite powder
NiZn铁氧体粉料生产中喷雾造粒用料浆的研究
3.
Solid spherical granules are often produced in spray granulation,and sometimes some morphologies such as pores,dimples appear in the surface of granules.
喷雾造粒是将溶液或悬浮液等原料喷雾固化后制成一定形状和强度的细小颗粒的一种重要的造粒方法。
5)  spray prilling
喷雾造粒
1.
Technology control of spray prilling of liquid-phase sintering SiC;
液相烧结碳化硅喷雾造粒工艺控制
2.
The effective factors of SiC premix powder spray prilling were analyzed through the experiments.
通过SiC喷雾造粒试验,分析了影响SiC造粒粉性能的因素,如进出口温度、浆料的固含量、喷雾压力及进料速度等;同时总结出了喷雾造粒时的合理工艺,制备出了松装密度为0。
3.
% nano-TiO -2 powder prepared by spray prilling were investigated in consideration of dispersant content,binder content and solid loading.
本文研究了分散剂、粘结剂及固相含量等流变学因素对喷雾造粒粉体流动性的影响。
6)  spray-granulation
喷雾造粒
1.
Particle growth mechanisms and the effects on them of fluidising gas velocity, liquid feedrate and initial particle size have been studied experimentally in a batch vibro- fluidized bed spray-granulation.
在间歇操作的振动流化床中,实验研究了喷雾造粒的颗粒成长机理以及流化速度、进风温度、料液加料速度、初始物料颗粒尺寸大小对造粒的影响。
补充资料:YPG系列压力喷雾干燥(造粒)机

 

[工作原理]

YPG系列喷雾干燥机是采用压力式喷嘴借助高压泵的压力将溶液、悬浮液、乳浊液、膏糊状物料雾化成细小液滴,然后与高温热空气进行快速热交换,在极短时间内以简单的工艺迅速连续干燥成细颗粒状物料的设备。

[应 用]

 食品工业

蛋奶制品

富脂奶粉、胳朊、可可奶粉、代乳粉、蛋清(黄)等

食物及植物汁

燕麦、鸡汁、咖啡、速溶茶、调味香料肉、蛋白质、大豆、花生蛋白质、蛋白质水解物、南瓜粉等。

糖类

玉米浆、玉米淀粉、葡萄糖、果胶、麦芽糖、山梨酸钾等。

 医药品

中药浸膏、药胶、酵母、维生素、抗生素、淀粉酶、脂肪酶、蛋白酶等

 塑料树脂

AB,ABS乳液、脲醛树脂、酚醛树脂、密胶(脲)甲醛树脂、聚乙烯、聚氯乙烯等

 洗涤剂

高级洗衣粉、普通洗衣粉、肥皂粉、苏打粉、乳化剂、增白剂、磷酸剂等

 化学工业

氟化钠(钾)、碱性染料颜料、染料中间体、复合肥、甲荃硅酸、催化剂、硫酸剂、氨基酸、白碳黑等

 陶瓷

氧化铝、瓷砖材料、氧化镁、滑石等

 其它

氢氧化铝、氯化钙、硬脂酸剂等冷却喷雾
  1. 空气加热装置(电、电+蒸汽、热风炉)
  2. 高压泵
  3. 喷嘴
  4. 干燥塔
  5. 除尘装置(旋风分离器、脉冲除尘器、布袋除尘器)
  6. 引风机

[选型请提供以下数据]

                        
  1. 物料名称、状态
                        
  2. 产量、处理液料量、含水量或含固量。
                        
  3. 原液料湿度、比重、粘度、表面张力。
                        
  4. 进风温度、产品耐热温度。
                        
  5. 产品含水量、粒径。
                        
  6. 加热方式及热风与物料接触方式(顺流、逆流)。
                        
  7. 除尘装置
                        
  8. 其它附属设备。
                        
  9. 安装场地条件。
                      

[技术参数]
 
型 号
50
100
150
200
300
500
1000
水份蒸发量(kg/h)
50
100
150
200
300
500
1000
外形尺寸(mm)ΦxH
1200x8900
1800x11500
2200x13500
2400x14800
2800x15400
3400x18800
4600x22500
功率(KW)
8.5
14
22
24
30
40
82
进风温度(°C)
300-350
产品含水量(%)
<5(可达0.5)
物料回收率(%)
>97
电加热(KW)
75
120
蒸汽+电(Mpa+KW)
0.5+54
0.6+90
0.6+108
温度低于200时,可具体按实际情况计算
热风炉(Kcal/h)
150000
300000
300000
400000
600000
1000000
1500000
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条