说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 三维应力分布
1)  3-D stress distribution
三维应力分布
1.
3-D stress distribution of rotate impeller and its improvement;
旋转叶轮三维应力分布及其改善措施
2.
Throuth the stress calculation for the model slices the pipe s 3-D stress distribution state is solved.
通过对冻结模型的切片应力计算,求出了涵管在静土压力下的三维应力分布
2)  three dimensional stress analysis
三维应力分析
3)  3 d distribution
三维分布
1.
The 3 D distribution of target magnetic field is studied.
用麦克斯韦方程,推导了射频磁控溅射靶磁场的数学表达式,并研究了靶磁场的三维分布规律,得到了磁控靶的磁场在中心圆环有较强的水平分量、边缘有较强的垂直分量的结果,计算结果与实验结果相符。
4)  3D stress
三维应力
1.
The characteristics of 3D stress distribution of coal-seam and its thickness effects are obtained.
基于非对称综放开采布置特点,以谢桥煤矿1151(3)综放面地质技术条件为背景,采用计算机数值模拟,并结合现场实测研究,揭示非对称开采煤层三维应力分布及一次开采煤厚变化对应力分布的影响规律。
2.
The coupling equation of the seepage flow in fractured rock masses and 3D stress is concluded.
围绕裂隙岩体渗流与应力之间的关系问题,从理论出发,经过合理的建模和严密的推演,得出裂隙岩体渗流与三维应力的耦合方程。
3.
The physical model and strict relative equations of rock mass with single fracture under 3D stresses are proposed by considering the tectonic characteristics of fracture in rock.
建立了单一裂缝岩体在三维应力作用下的物理模型和严密的关系方程,推导出渗透系数计算公式,并对该公式进行了大量的三轴试验数据的验证。
5)  three dimensional stress
三维应力
1.
The experiment expresses that the method of control fracturing of rock in three dimensional stress state can create cracks more than two randomly and improve the permeate rate of rock seams efficiently.
通过对岩石三维应力控制压裂实验结果的分析,得出了裂缝的条数、长度、方向与应力场、装药量、孔径的关系。
6)  D stress
三维应力
1.
In this paper, the secondary stress, radius and displacement in plastic zone of cylinder tunnel under 3-D stress are analyzed on basis of do u ble shear strength theory.
为此本文利用双剪强度理论分析了三维应力状态下圆筒形巷道塑性区次生应力、半径和位移。
2.
In this paper,the authors study stress and strain field of rock body in dam site using 3- D finite- element simulation method,discuss the correlation3- D stress and strain of rock body to rock failure,and evaluate the stability of rock body.
采用三维有限元数值模拟方法 ,对坝址区岩体应力场和位移进行了研究 ;探讨了岩体三维应力、应变分布与岩体变形破坏的关系 ,评价了岩体的稳定
补充资料:应力分布
分子式:
CAS号:

性质:物体在加载的情况下,其表面和内部各点所受的应力大小和方向、应力分布不仅与材料性质和该物体的几何形状有关,而且与载荷大小和加载方式有关。弄清受载物体的应力分布是工程中十分重要的问题。测量应力分布的方法多种多样,如光弹应力分析、贴片法等。 

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条