1) inorganic binding material
无机粘结胶
1.
Performances of inorganic binding material and its application —an ideal material for remedying and reinforcing concrete works;
一种用于混凝土修补的无机粘结胶的性能及应用
2) coating by inorganic cementitious bonding
无机胶凝粘结涂层
4) inorganic adhesive
无机胶粘剂
1.
In this paper,the types,the characteristics and the applications of inorganic adhesives were introduced in detail.
详细介绍了无机胶粘剂的种类、特性、应用范围。
5) inorganic binder
无机粘结剂
1.
The composite inorganic electric heating carbon coating was prepared by adding composite carbon powders as conductive filler into inorganic binder,coating molded onto the surface of the heat resisting matrix after .
采用在耐热无机粘结剂中添加复合型炭系粉料,在耐热载体表面预埋电极后用涂覆法成型固化,再在其表面喷涂含铝高温涂料经二次固化制得复合型无机炭系电热涂层。
2.
The title organic-inorganic hybrid heat resistant insulation coatings has been developed based on organic resin, inorganic binder and fillers, which shows good adhesion and insulation properties after heat treatment at 600℃ 1h.
采用有机硅树脂、无机粘结剂和无机填料制备的有机无机复合耐高温绝缘漆,其涂层经600℃,1h的热处理后可具有良好的附着力和绝缘性能。
6) inorganic viscose
无机粘结剂
1.
Based a vast amount of upon tests,we use an inorganic viscose——Nami viscose in the smearing powder techology for the compact fluorescent lamp tube to replace the organic viscose,such as nitrocotton in the traditional smearing techology.
在大量试验的基础上，在双Ｕ紧凑型荧光灯管的涂粉工艺中采用无机粘结剂——纳米胶，取代传统涂粉工艺中的有机粘结剂（硝化棉），用水溶剂（去离子水或蒸馏水）代替醋酸丁酯溶剂，免去了高温烤管工艺，得到了粘着强度牢固、涂层厚度适宜、外观洁白的紧凑型荧光灯。
补充资料：反应型硅酸盐无机胶
分子式：
CAS号：
性质： 以硅酸盐为基体，金属氧化物、氢氧化铝、氟硅酸盐、硼酸盐及磷酸盐等为固化剂，经化学反应形成高度交联的固化体。耐水性和耐热性优良，胶接强度高。胶接性能因碱金属的种类而异，胶接强度为：钠盐>钾盐>锂盐；耐水性则为：锂盐>钾盐>钠盐。主要用于金属、陶瓷、玻璃等材料的胶接。
CAS号：
性质： 以硅酸盐为基体，金属氧化物、氢氧化铝、氟硅酸盐、硼酸盐及磷酸盐等为固化剂，经化学反应形成高度交联的固化体。耐水性和耐热性优良，胶接强度高。胶接性能因碱金属的种类而异，胶接强度为：钠盐>钾盐>锂盐；耐水性则为：锂盐>钾盐>钠盐。主要用于金属、陶瓷、玻璃等材料的胶接。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条