说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 刻槽爆破
1)  Indenting Blasting
刻槽爆破
1.
Ultra-Deep Indenting Blasting Under Complicated Conditions;
复杂条件下的超深刻槽爆破
2)  V-shaped notch blasting
V形刻槽爆破
1.
V-shaped notch blasting is that cutting slots with certain depth along axis -direction of the hole is determined according to the blast-crazing, and then load uncoupled charge and detonation.
V形刻槽爆破是指在炮孔孔壁上按爆破开裂方向,切出一定深度的轴向对称V形槽,采用不耦合装药结构进行的一种断裂控制爆破。
2.
In this paper,incising blasting engineering in granite row stone exploitation as the research object,in order to analyze the fracturing mechanism principles of V-shaped notch blasting and the influence of blasting parameter changing to V-shaped notch blasting effect,the elastic-plastic isotropy and multi-notched hole of plane strain model is set up.
文章以花岗岩荒料开采中的切割爆破工程实践为研究对象,为分析V形刻槽爆破成缝机理及爆破参数改变对刻槽爆破效果影响等内容,建立了各向同性脆性材料的多刻槽孔准平面应变模型,以显式动力分析有限元程序ANSYS/LS-DYNA为模拟运算工具,详细计算了在动载作用下槽孔周围及双孔连心线上岩体的动态应力分布与变化规律,并运用断裂力学理论分析刻槽爆破动态成缝机理。
3)  blow-up time
爆破时刻
1.
The existence theorem of blow-up solutions,the upper bound of "blow-up time",and the upper estimate of "blow-up rate" are given under some suitable assumptions on g,f and initial data.
运用Hopf极值原理讨论了一类具Dirichlet边界条件的半线性抛物方程ut=(g(x)u)+f(x,u,q,t)(q=|u|2)的爆破问题,在对函数f,g和初值作适当的假设之下,给出了爆破解的存在性定理和“爆破时刻”的上界估计及“爆破率”的上估计。
2.
By constructing an auxiliary function and using Hopf s maximum principles on it,existence theorems of blow-up solutions,upper bound of"blow-up time,"and upper estimates of "blow-up rate" were got respectively under suitable assumptions on f,g and initial function u\-0(x).
运用辅助函数法和 Hopf极值原理讨论了一类具有非齐次 Neumann边界条件 u/ n=g(x,t)的半线性抛物方程 u,t=Δ u+f (u)的爆破解 ,在对函数 f ,g和初值作适当的假设之下 ,给出了爆破解的存在性定理和“爆破时刻”的上界估计及“爆破率”的上估计 。
4)  Cutting blasting
掏槽爆破
1.
The technology problems of blasthole depth,cutting blasting,smooth wall blasting,and directional blasting is discussed.
文章对炮眼深度、掏槽爆破、光面爆破、定向爆破等技术问题进行了探讨。
2.
This paper presents the method of optimizing cutting blasting plan of rock roadways by means of grey system theory, and applies it to choose cutting blasting methods for hard rock roadways and achieves better effect.
借助于灰色理论构建了优选岩巷掏槽爆破方案的方法,并将该方法应用于现场的坚硬岩石巷道爆破掏槽方式的选择中,取得了较好的效果。
3.
Based on the theory as well as model test and engineering practice, some major techniques on cutting blasting and smooth blasting in rock tunnel are discussed .
结合岩石爆破破碎理论、模型试验和工程实践 ,对岩巷掘进中深孔光爆几个较为关键的技术问题 ,特别是掏槽爆破和光面爆破进行了较为细致地分析和研究 ,推荐了较为合理的掏槽形式和掏槽参数、光爆装药和光爆参数 ,提出了较为合理的起爆延迟间隔时
5)  Cut blasting
掏槽爆破
1.
Research on cut blasting experiment of bottom air column charge and its mechanism;
底部空气柱装药掏槽爆破试验及机理研究
2.
Application of cut blasting in trench digging technique in the middle of the stope;
掏槽爆破在采场中部掘沟工艺中的应用
3.
The application of cut blasting in Ekou iron mine is described.
介绍了采场中部掏槽爆破在峨口铁矿的应用 ,提供了一组比较合理的爆破参数 ,供类似矿山的生产作参考。
6)  cut blasting
切槽爆破
补充资料:500千克2式航空爆破弹

该弹由弹体、尾翼装置、传爆管、弹耳和炸药等组成。弹长1.5米,弹径450毫米,弹重473千克。弹身上有两个相距250毫米的弹耳,可悬挂在轰炸机和强击机下,在距地面600米以上高空进行投放。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条