1) visible contour line
可见轮廓线
1.
The characters of the singular point of the visible contour line of a concave rotative surface and its corresponding projection are analyzed on condition that the projection of the contour line is smooth near the singular point, the shape of the visible contour line of a concave rotative surface near the singular point is further studied.
对凹回转面可见轮廓线的投影在奇点附近仍光滑的情况下,分析了可见轮廓线本身与奇点对应点处的曲线特征以及可见轮廓线在其对称平面的投影图上与奇点对应的点的特征。
2) line contour
直线轮廓
3) cam profile
凸轮廓线
1.
A new method of CAD animation for drawing cam profile of engine;
发动机凸轮廓线生成的CAD动画新方法
2.
Optimal design of cam profile by means of non-uniform (B-spline) curve;
用非均匀B样条曲线优化设计凸轮廓线
3.
Through application of polar method to the equivalent four bar linkage of the cam mechanism, the principle of a new graphic method for determing the radius of curvature of planar cam profile is studied, the geometric and kinematic relationships are given.
通过瞬心法进行高副低代,得到了摆动从动件凸轮机构的等效四杆机构;在此基础上,论述了凸轮廓线曲率半径图解法的原理,给出了它们之间的几何运动关系。
4) outline curve
轮廓曲线
1.
Double circular appoximating algorithm of outline curve;
轮廓曲线的双圆弧逼近算法
2.
Spectrum analysis of outline curve of body surface of earthworm and statistical model
蚯蚓体表轮廓曲线谱分析及统计模型
3.
Research on design method of a cam outline curve based on AutoCAD
基于AutoCAD的凸轮轮廓曲线设计方法研究
5) contour line
轮廓线
1.
Study on the algorithm of sectional contour lines building for Laser Direct Metal Forming;
金属件激光直接成形中截面轮廓线的生成算法研究
2.
Global recognized algorithm based on characters of contour line direction;
基于图像轮廓线方向特性的整体识别法
3.
A Fast-Cutting Algorithm for 3D Surface Model Based on Contour Line;
一种基于轮廓线的三维表面模型的快速切割算法
6) curve contour
曲线轮廓
1.
For machining sine-function curve contour,general using line or arc line to in NC,this paper briefly introduces approaching methods and programming,according to calculation of approaching node and approaching inaccuracy.
对于加工正弦函数曲线轮廓,一般要采用直线段逼近或圆弧段逼近的方法来实现加工。
补充资料:地下轮廓线
地下轮廓线
underground outline
暇挡包坏及排拘图t的 卿水吵地砂廓豁黔擎纂鬓豁燕!廓不许平均坡降值为工必亡‘则要大 L一C式中L为渗径长度朴万为上下游最大水头备允许平均渗透坡降的赓吐数,称为渗径系数,与地为土?tⅡI型i当不透水层埋藏深度不大时,j采用截流板桩或深齿墙截断透水层露图2,j畦)≯j_0- |l _0。、Ⅳ型,底板上下游均设置板桩的布置型式(图2,d)’适用于无粘性土地基j、特别是双向挡水自句J隋况。当地基土质’为粉砂或极细砸步时,0闸室基底左右两侧也常采用板桩封闭O?ll_…~ 一0 0_一_彝赞淤砰潍┌────┬───┬───┬──┬─────┬──┬──────┐│谈 │粉砂 │细_砂 │中砂│粗砂 │中、│粗砂芙 ││ │ │ │ │ ,│细砾│卵石 │├────┼───┼───┼──┼─────┼──┼──────┤│有反滤层│_9一13│了一9 │5~7 │4一5 │3一4│_么5今店 │├────┼───┼───┼──┼─────┼──┼──────┤│无反滤层│ │ │ │ │ │ │├────┼───┴┬──┴─┬┴─────┴──┼──────┤│ │ │ │ │ │├────┼────┼────┼───┬─────┼──────┤│谈 │轻粉质 │沙壤土- │壤土 │粘土 │ - ││ │沙壤土 │ │ │ │淤泥 │├────┼────┼────┼───┼─────┼──────┤│有反滤层│7一9 │5一7 │3一百 │ │ 价一、- ││ │ │ │ │2一3 │ — │├────┼────┼────┼───┼─────┼──────┤│无反滤层│ │ │4一7 │3~4 │ │└────┴────┴────┴───┴─────┴──────┘和地鬓摄辉鬓纂盟暴鬓肆霆裂粼置,一最后所采用的实际地下轮廓线长度应不小于按照老少型臭粉咒黔奎念翼睿{翼麒蕊吵卿聊冲排水铺盖前板桩主板桩截流板桩粘土排水图2地下轮廓布置型式
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条