说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 压电致动
1)  PZT-drive
压电致动
2)  piezoelectric actuators
压电致动器
1.
Effect of preliminary pressure on the displacement and hysteresis of the piezoelectric actuators
预压力对压电致动器位移和迟滞影响的分析
2.
Based on the theory of the Hoff type sandwich plates, the constitutive relationship of fiber reinforced composite materials and that of the piezoelectric actuators, the finite element formulation of sandwich plates with piezoelectric actuators is established.
依据Hoff型夹层板理论以及纤维增强型复合材料和压电致动器的本构关系 ,首次建立了每个结点具有 7个位移自由度的含压电致动器的四结点矩形复合材料夹层板单元 。
3.
Based on the theory of the Hoff type sandwich plates, the finite element formulation of sandwich plates with piezoelectric actuators is established.
依据Hoff型夹层板理论以及纤维增强型复合材料和压电致动器的本构关系,首次建立了每个结点具有7个位移自由度的含压电致动器的四结点矩形复合材料夹层板单元。
3)  piezoelectric actuator
压电致动器
1.
Based on the fundamental equation of the piezoelectric, we built a model of piezoelectric stack and designed a piezoelectric actuator which has the ability of driver and sensor and simple, manufacture easily after analyzed one chip of piezoelectric.
设计出的压电致动器,不仅具有驱动与传感功能,而且具有简单、易加工等特点,然后通过试验研究,对压电致动器的预压进行了标定,并选择了合适的预压弹簧,完成了对致动器的成品化。
2.
The effect of the bonding layer between beam and piezoelectric actuator is considered in the analysis.
利用虚功原理,建立了一种智能机械结构单面粘贴有压电致动器的梁结构的拉伸弯曲耦合模型,在分析过程中,考虑了梁与致动器之间粘贴层的影响·通过分析可得,粘贴层剪切应力的分布与致动器端部附近的应变分布有相似的特征·随着粘贴层的剪切模量的增加或其厚度的减小,则剪切力在靠近压电致动器端部区域迅速增大
3.
A bidirectional power supply for piezoelectric actuator was proposed and studied,which can apply high bidirectional voltage to the piezoelectric actuator continuously from negtive to positive.
提出并研究了一种压电致动器电源,它可以实现对压电致动器的从负电压到正电压的双向电压作用,且作用电压可以很高并可不间断连续作用。
4)  actuator voltage
致动器电压
5)  pie zoelectric/electrostrictive actuator
压电/电致伸缩致动器
6)  piezoelectric actuator
压电陶瓷致动器
1.
To solve the problems of hysteresis, creep and low bandwidth of piezoelectric actuator actuated by a voltage control piezoelectric driver, a new piezoelectric driver was designed based on current control theory.
为了解决电压控制型压电陶瓷驱动器驱动压电陶瓷时存在的迟滞、蠕变和带宽窄的问题,设计了基于电流控制的压电陶瓷驱动器,利用压电陶瓷致动器位移与其所带电荷量间的线性关系,该驱动器通过控制压电陶瓷的充电电流和时间控制其位移量。
2.
According to the driving power supply for piezoelectric actuator,a new type of driving power supply using high voltage amplifier was designed and developed.
根据压电陶瓷致动器对其驱动电源的要求,利用高压运放设计研制了一种新型的驱动电源,通过对压电驱动器的实验研究表明,其具有精度高、性能稳定、分辨率高、纹波小和电路结构简单等优点,能够满足微定位系统中压电陶瓷驱动器的控制需要。
补充资料:湍动致宽
      由湍动运动引起的谱线致宽。这种机制是罗斯兰德于1928年提出的。湍动是比原子的尺度大得多而比恒星的半径小得多的气体团的运动。通常把比光子自由程大的湍动称为宏观湍动,比光子自由程小的湍动称为微观湍动。在许多恒星中,都存在因湍动而出现的谱线致宽,特别是在超巨星中更加明显。恒星大气内的原子同时参与两种完全杂乱的运动──热运动和湍动。若视向速度在(ζ,ζ+dζ)内的相对原子数为:
  
  
  
  ,式中ζ娭=ζ娿+ζ婈,ζ0为原子热运动的最或然速度,ζt为湍动的最或然速度(都指视向速度),则辐射按频率分布的形式为:
  
  
    ,式中。
  
  
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条