1) isolation coefficient
隔震系数
1.
The isolation coefficient is preseneted to evaluate the isolating effectiveness.
基底隔震技术目前已逐步得到应用,为了避免滑动减震的盲目性,需要预先判断结构的减震效果,针对以剪切变形为主的多层和中高层基底隔震体系,提出了以隔震系数定量评价结构隔震效果,并给出了隔震系数计算方法。
2) isolation
隔震
1.
Research on the calculation of the mode analysis response spectrum of the seismic base isolation steel storage tank;
储罐基底隔震振型分解反应谱计算分析研究
2.
The application of isolation construction technology in engineering;
隔震施工技术在工程中的应用
3.
Quake isolation experiment of a 8-story ,big-space concrete masonry building;
八层大开间混凝土砌体结构模型隔震性能试验
3) vibration isolation
隔震
1.
It can be called vibration isolation technology of reinforced concrete structure foundation.
为使输入上部结构的地震能量和加速度大为降低,从而大幅地提高建筑结构对强烈地震的防御能力,在工程实践中常通过水平刚度低且具有一定阻尼的隔震器在上部结构与基础之间实现柔性连接,这便是混凝土结构基础隔震技术。
2.
The calculation results show that the lead rubber bearing has good vibration isolation effect in the cases of the aqueduct both with design water level and without water.
采用流固耦合渡槽薄壁结构梁段单元有限元模型,分别利用双线性模型和Wen模型来模拟铅芯橡胶支座的非线性滞回恢复力特性,对某大型渡槽结构进行了空间隔震响应研究。
3.
The seismic reduction performance of high pier and long span railway simply-supported steel truss girders with the bearing of shock absorption and vibration isolation is presented by using time history response analysis,and technical applicability of shock absorption and vibration isolation for the bridge of high pier is discussed.
采用时程分析方法,研究了具有减隔震支座的铁路高墩大跨度简支钢桁梁桥的减震性能,探讨减隔震技术在高墩桥梁中的适用性。
4) seismic isolation
隔震
1.
Soil-pipe end interaction analysis for seismic isolation pipelines crossing fault;
跨断层隔震管道管端与土体相互作用分析
2.
Application of a new type of seismic isolation bearing in vibration control of lattice shell structures;
新型隔震支座在网壳结构振动控制中的应用研究
3.
Application of SMA-rubber bearing to structural seismic isolation;
应用形状记忆合金-橡胶复合支座的结构隔震
5) base isolation
隔震
1.
Study of Base Isolation of Frame Construction;
框架结构的基础隔震研究
2.
In the paper,the random earthquake response of structures with multi-degrees of freedom and nonlinear hysteretic base isolation subjected to filtered white noise earthquake excitation is studied systematically.
本文对多自由度双线性滞变隔震结构在过滤白噪声地震激励下的随机响应问题进行了系统研究。
3.
The influences of the primary structure base isolation, the damping of the secondary structures and site condition upon the seismic response of the secondary structures are considered.
对一幢典型结构,考虑不同场地条件、主体结构隔震以及二次结构不同阻尼比的影响,计算各层的楼面绝对加速度与相对位移反应谱。
6) shock isolation
隔震
1.
Theoretical study of parallel and composite shock isolation system;
并联复合隔震体系理论研究
2.
Little attentions have been paid to the application of shock isolation system with magnetorheological damper (MRD) in blast-resistant structures.
磁流变阻尼器隔震系统具有隔震效率高、能耗低、可控性好等优点,但针对抗爆结构隔震的研究还很少。
3.
The paper introduces the working principle of several kinds of shock isolation techniques in our country and sums up the application actuality and development prospect of shock isolation techniques in our country.
介绍了几种隔震技术的工作原理及应用情况,总结了我国隔震技术的应用现状及发展前景。
参考词条
补充资料：隔震制品
分子式：
CAS号：
性质：亦称橡胶防震、隔震制品。用于消除或减少机械震动的传递，达到减震、消音及减少冲击所致危害的橡胶制品统称橡胶减震制品。其中包括橡胶减震器、橡胶缓冲器(块、垫)、橡胶连接件、空气弹簧及橡胶护舷等。为纯橡胶或带织物、金属骨架增强的橡胶产品，一般用模压法制造。广泛用于房屋建筑、机械设备、车辆、舰船和仪表等行业。
CAS号：
性质：亦称橡胶防震、隔震制品。用于消除或减少机械震动的传递，达到减震、消音及减少冲击所致危害的橡胶制品统称橡胶减震制品。其中包括橡胶减震器、橡胶缓冲器(块、垫)、橡胶连接件、空气弹簧及橡胶护舷等。为纯橡胶或带织物、金属骨架增强的橡胶产品，一般用模压法制造。广泛用于房屋建筑、机械设备、车辆、舰船和仪表等行业。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。