说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 挤出机过程
1)  extruder process
挤出机过程
1.
The good quality of this method has been verified in the application research on a polymer extruder process.
在拉伸挤出机过程中的应用研究验证了这种方法的优良性能。
2)  extrusion process
挤出过程
1.
After establishing the model of SPC,the control system of plastic extrusion process was developed.
在建立统计过程控制模型后,开发了应用于塑料挤出过程的控制系统。
2.
The functional relation between the extrusion process temperature and shear stress and shear rate of the selected compounds for tire and hose was gained by determining their rheological properties The theoretical basis for changing the compounds viscosity of extrusive process by means of temperature or shear rate was put forwar
对几种用于轮胎、胶管的混炼胶进行了流变性能实验 ,得到混炼胶剪切应力、剪切速率与挤出过程温度之间的函数关系 ,为利用温度或剪切速率改变混炼胶挤出成型过程的粘度提供了理论依据。
3.
The dynamic extrusion process of PP/CaCO3 and LDPE/CaCO3 in the electromagnetic dynamic plasticating extruder was studied, and the effect mechanism of vibration force field on the extrusion process of filled polymer system was discussed.
研究了利用塑料电磁动态塑化挤出机加工PP/CaCO_3和LDPE/CaCO_3时的动态挤出过程,探讨了振动力场对聚合物填充体系挤出过程的影响规律和作用机理。
3)  Extrusion [英][eks'tru:ʒən]  [美][ɛk'struʒən]
挤出过程
1.
Theoretical Analysis and Experimental Study of Axial Circle Flow in Twin-Screw Extrusion;
双螺杆挤出过程轴向循环流理论分析及实验研究
2.
The Application of Statistical Process Control (SPC) Technology in Extrusion Process;
统计过程控制技术(SPC)在挤出过程中的应用
4)  twin screw extrusion
双螺杆挤出过程
1.
In twin screw extrusion process, the island sea model is the coexistent form of the two phase of solid and liquid, which has been seen usually in the melting process of solid pellets.
在双螺杆挤出过程中 ,聚合物颗粒挤出熔融过程中较为常见的一种固、液两相共存的形式可以用“海 -岛”模型来描述。
2.
With visualization twin screw extruder, the melting progressing of Polypropylene (PP) in intermeshing counter rotating twin screw extrusion was investigated.
借助于玻璃视窗可视化挤出机,对啮合异向双螺杆挤出过程中聚合物粉料的熔融进行了实验研究;考察了螺杆构型、操作条件对聚合物熔融的影响,并总结出熔融过程的基本模型。
5)  characters of extrusive process
挤出过程特点
6)  Extrusion Process SPC system
挤出过程SPC系统
1.
Two pieces of work will be finished for the Extrusion Process SPC system, one is that investigations in characters of extrusive process decide which method can be used in Extrusion Process SPC s.
二是编制挤出过程SPC系统软件,并保证其实现在挤出生产过程中的预前控制目的。
补充资料:多螺杆挤出机
分子式:
CAS号:

性质:通常指机筒中有三根以上螺杆的挤出机。螺杆可配置成一字形或V字形。还有一根主动螺杆、若干根从动螺杆的行星式多螺杆挤出机。从工作机理来讲,双螺杆挤出机与多螺杆挤出机是一样的,故相对于单螺杆挤出机,双螺杆挤出机有时也被称作多螺杆挤出机。多螺杆挤出机使聚合物熔体有较大的比表面,有利于挥发物从熔体中脱出,主要用于混配,反应挤出,聚合物精制,聚合物溶液浓缩等操作。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条