1)  prototype trial-production
样机试制
1.
In view of the speciality of prototype trial-production and tile site management of trial-Production,the action of of technology and quality control during the trial-production of relay prototype is described.
工艺技术及质量管理与继电保护产品样机试制的质量密切相关。
2)  sample machine
样机
1.
Modra Technology: new tufted carpet sample machine;
Modra技术公司:新型簇绒地毯小样机
2.
Through the analysis of the short cicuit flowing space of the sample machine of the by- attic dust collection fan and property test result,some conclusions are drawn in this article.
本文通过对所研制的风幕集尘风机样机的短路流场及特性实测结果分析,得出一些具有实际意义的结论。
3.
Proposes the key measure taken in development of sample machine because the RVreducer used in robot requires high accuracy of transmission accuracy, backlash and rigidity.
根据机器人用RV减速器对运动精度、回差及刚度有极严格的要求,提出了样机研制过程中所采取的关键措施。
3)  model machine
样机
1.
A model machine has validated the feasibility of the design scheme.
阐述了方案的设计原理、相关参数的确定和控制方式,分析了结构设计的难点和采取的相关措施,并试制样机验证了设计方案的可行性。
2.
The test results of model machine show that most technical indexes reach the expected objects.
对样机的测试结果表明,多项技术指标达到了预期目标。
3.
The results of model machine experment indicate that the main data accord with need of design.
为了克服传统制冷系统蒸发温度很难达到-100℃的缺点,设计了一种新型的低温制冷系统,进行了系统混合工质的配比、热力参数的计算以及主要部件如:压缩机、冷凝器、组合换热器、毛细管的设计与选型,经过样机试验,结果表明各项指标均达到设计要求。
4)  prototype
样机
1.
Prototype manufacturing and experimental research of roller chain harmonic drive;
滚子链谐波传动的样机研制及试验研究
2.
Virtual prototype technologe and it s application foreground in our country;
虚拟样机技术及其在国内的应用前景
3.
A Study of Automatic North Seeking Gyrotheodolite and Prototype Design;
自动寻北陀螺经纬仪的研究与样机设计
5)  sample
样机
1.
Therefore, the result of these three structure sample performance tes.
为了对各种结构型式的双曲柄环板式针摆行星传动技术性能和优缺点有符合实际的深入了解,从中选择了三种主要结构型式,研制出优化设计的样机进行性能试验。
2.
At the base of guaranteeing the electric demands and taking many factors into account, important problems in the design of the sample has been appointed out.
在保证电气要求及考虑诸多因素的基础上,指出样机设计中的重点问题。
6)  Virtual prototype
虚拟样机
1.
Study on dynamics of roller of scoop loader by using virtual prototype;
基于虚拟样机的铲斗式装载机卷筒动力学研究
2.
Realization of CNC machine tool virtual prototype in UG integrated environment;
UG集成环境下数控机床虚拟样机的实现
3.
Application of Virtual Prototype Technology in Development of XK714;
虚拟样机技术在XK714研制中的应用
参考词条
补充资料:3,6-二氯-2-甲样机苯甲酸
分子式:C8H6CL2O3
分子量:221.0
CAS号:1918-00-9

熔点:114~116℃
蒸气压:0.5Pa(100℃)
毒性LD50(mg/kg):大白鼠急性进口2900±800,以含500mg/kg饲料饲喂大鼠两年和以含50mg/kg饲料饲喂狗两年,均未见异常。鱼毒LC50(96h):虹鳟28mg/L,青腮翻车鱼23mg/L。
性状:原药为淡黄色结晶固体。纯品是无色结晶固体。
溶解情况:在25℃下溶解度:水中6.5克/升,丙酮中810克/升,二氯甲烷中261克/升,乙醇中922克/升,甲苯中130克/升,二甲苯中78克/升。
用途:叶面或土壤除草剂,通过植株叶和根的传导。用于防除芦笋、玉米、高粱、小麦、甘蔗等作物田中一年生和多年生阔叶杂草,也用于防除耕作区的木本灌木丛。通常单用或几个苯氧羧酸类除草剂混用,也可与其他类型的除草剂混用。
制备或来源:1,2,4-三氯苯用氢氧化钠甲醇溶液水解,生成2,4-二氯苯酚在压力下与二氧化碳加热反应,生成2-羟基-3,6-二氯苯甲酸,最后用硫酸二甲酯甲基化即得。
备注:在约200℃分解。在正常情况下稳定,具有抗氧化和抗水解能力。 专利号 US 3013054不存在专利权问题
类别:除草剂


说明:补充资料仅用于学习参考,请勿用于其它任何用途。