说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 室内表面反射比的加权平均值
1)  weighted mean value of interior surface reflectance
室内表面反射比的加权平均值
2)  within-class weight average
类内加权平均值
1.
Aiming at the problem that recognition rate of Principal Component Analysis(PCA) algorithm is low in face recognition, this paper proposes a modular PCA algorithm based on within-class weight average.
针对主成分分析(PCA)算法在人脸识别中识别率低的问题,提出一种基于类内加权平均值的模块PCA算法。
3)  weighted reflectance
加权平均反射率
1.
The reflectance of DL SiO_2/ZnSe and the SiO_2/ZnS ARCs as a function of wavelength and weighted reflectance for SiO_2 top anti-reflection coatings with different thicknesses in GaAs solar cells are calculated according to the optical interference matrix.
考虑双层减反射膜材料的折射率色散效应,采用光学干涉矩阵法计算了SiO2/ZnSe和SiO2/ZnS两种GaAs太阳电池双层减反射膜的反射率与波长的函数曲线,以及加权平均反射率随着顶层减反射膜SiO2厚度变化的函数曲线,并与未考虑色散效应的情况进行了对比。
4)  weighted average square root value
加权均方根的平均值
5)  weighted mean
加权平均值
1.
The spacingbetween two fringes has no effect upon the error of measurement of the curvatureradius R,and for processing experimental data the weighted mean and its standarddeviations must be used, at the same time, two new deductions are obtained.
运用误差分析方法,得出干涉环的宽度对曲率半径R的测量误差没有影响,必须用加权平均值及其标准偏差处理实验数据等结论,同时导出了两个新的推论。
2.
The weighted mean of the profile bearing length ratio was defined as a new parameter to describe the surface profile of precision machined parts.
叙述与微观不平度形状特性有关的表面粗糙度现有参数及其不足,给出新参数- 轮廓支承长度率加权平均值的定义,从几何精度方面描述零件表面的支承与耐磨性能,通过实验与计算说明了新参数的实用性。
6)  weighted average value
加权平均值
1.
The weighted average value of respirable dust based on time and coal face length is recommended as an index for evaluation to satisfy the requirements of labor hygiene.
现行的评价指标及测试方法不能完全反映工作面环境质量的好坏,因此,本文依据劳动卫生学的要求,通过分析,建议用呼吸性粉尘浓度对时间和工作面长度的加权平均值作为环境质量的评价指标:依据离散传质和数学叠加的原理给出了新评价指标的计算方法和测量位置。
2.
This paper presents the determination of the elevation anomaly of GPS point in mountainous area ,using the method of weighted average values.
本文提出了用加权平均值法,求定山区GPS点的高程异常,并提出了两种定权方法。
补充资料:加权平均值
分子式:
CAS号:

性质:简称加权平均值。在对被测定量进行多组测定时,考虑的每组测定结果的“权”后计算出的算术平均值,是全部加权值之和除以总权。,权值Wi=1/σ12,σ12,是测定Xi的方差。在不等精度测量中,加权平均值是一组测定值中出现概率最大的值,是总体平均值的无偏估计值。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条