说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 截面畸变屈曲
1)  Section distortional buckling
截面畸变屈曲
2)  distortional buckling
畸变屈曲
1.
Experimental study on distortional buckling of high strength cold-formed steel lipped channel columns under axial compression;
高强冷弯薄壁型钢卷边槽形截面轴压柱畸变屈曲试验研究
2.
On the distortional buckling coefficient of the compressed flange of lipped channel beams;
卷边槽钢梁受压翼缘畸变屈曲时的屈曲系数
3.
Simple formulae for distortional buckling loads of cold-formed lipped channel sections;
冷弯薄壁卷边槽钢的畸变屈曲荷载简化计算
3)  section distortion
截面畸变
1.
3-D FEM analysis of section distortion in bending process of the thin-walled rectangular tube;
薄壁矩形管弯曲过程截面畸变的三维有限元分析
2.
The effects of different cross section and post-stretching on cross section distortion and on springback are analyzed .
本文对矩形管截面铝合金型材拉弯成形工艺进行了研究 ,建立了位移控制拉弯工艺的有限元模型 ,采用ABAQUS软件对几种不同截面的铝合金型材拉弯成形过程进行了数值模拟 ,分析了不同补拉量对型材的截面畸变和回弹的影响以及不同截面形状抵抗拉弯成形时截面畸变的能力。
4)  cross section distortion
截面畸变
1.
FEM model establishment and variation of cross section distortion in circle tube pressing and bending;
圆管压扁-压弯连续变形过程有限元模型的建立及截面畸变研究
2.
It is shown that increasing the rigidity of cross section can decrease cross section distortion and springback.
本文基于动态显式有限元软件PAM-STAMP,针对一种典型的框架式车身用复杂截面挤压型材,对其力控制方式的直进台面式拉弯成形进行了数值模拟研究,对比分析了两种截面形状的型材截面畸变和回弹随补拉力增大的变形规律,并得到了摩擦系数对成形精度的影响。
3.
It is shown that the maximum die force and cross section distortion increase with increasing pre-stretching, while springback shows a decrease trend.
采用动力显式有限元程序Pam Stamp2000对铝合金矩形管的一种拉弯成形过程进行了模拟,分析了模具最大作用力、管材截面畸变、成形件回弹的变化规律。
5)  distortion of cross-section
横截面畸变
6)  conditions of distortional buckling
畸变屈曲条件
补充资料:关节屈曲线


关节屈曲线
joint flexion line

一般指小指第一、二关节的屈曲线,通常不止一条,若小指短而内屈,关节屈曲线只有一条,常为先天愚型的表现。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条