说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 数值换热研究
1)  numerical analysis of heat transfer
数值换热研究
2)  numerical study
数值研究
1.
Phoenics-based numerical study of mass transfer with two petroleum products in a batch pipeline;
基于PHOENICS顺序输送管道内两种油品传质数值研究
2.
Numerical Study of Knock Trend of Natural Gas Engine Based on a Multidimensional Model;
基于多维模型的天然气发动机敲缸趋势数值研究
3.
Combustion model and numerical study of flue gas deviation in tangentially fired boiler;
燃烧模型与切圆锅炉烟气偏差的数值研究
3)  numerical investigation
数值研究
1.
In this paper the numerical investigation on three-dimensional steady and unsteady rotor-stator interaction flow fields in a centrifugal pump were performed.
离心泵在国民经济各部门与日常生活中发挥着举足轻重的作用,本文以离心泵内部的三维流动为研究对象,应用适合于求解离心泵内部数值流动的有效算法,对离心泵内动静耦合的定常和非定常三维流动进行了详细的数值研究。
2.
Predictions indicate that the numerical procedures are reliable for numerical investigation of influence of different swirlers on combustion performance in annular combustors.
数值研究不同类型涡流器对环形燃烧室流场与性能的影响。
3.
From the economy of reactor coolant pump,based on computational fluid dynamics technology the numerical investigation of internal flow in reactor coolant pump of one 300MWe nuclear power plant in China was made.
从反应堆冷却剂泵的经济性出发,以国内某300MW e级核电站主泵为对象,利用计算流体技术(CFD)对其内部流场进行了数值研究,以效率为中心,重点分析了主泵叶轮段、导叶体段的速度、压力分布。
4)  numerical research
数值研究
1.
The numerical research for the injection screw is reviewed and introduced in detail.
概述了注塑螺杆理论和实验研究现状,系统阐述了注塑螺杆在数值研究方面的进展,最后展望了注塑螺杆的发展趋势,指出数值研究将成为今后螺杆研制的主要方法。
2.
The paper dissertates the representative numerical researches of formation damage, and describes conceptual models of damage, furthermore presents generic implementations of numerical researches.
本文论述了目前具有代表性的储集层伤害数值研究,提出了储集层伤害的概念模型,并进一步给出了伤害数值研究的概念模型和一般化实现方法,旨在为储集层伤害数值研究提供理论指导,使伤害建模更具有系统性和通用性,从而推动伤害数值研究的通用程序化。
3.
In this paper,for the purpose of investigating the selection criterion of the hub-tip ratio when designing a counter-rotating axial flow fan using the constant circulation flow pattern method,five counter-rotating axial flow fans have been designed with different hub-tip ratio and numerical research has been carried out to study these fans.
为了研究采用等环量设计方法设计对旋轴流通风机时轮毂比的选择准则,以不同的轮毂比设计了5种对旋轴流通风机,并对这5种风机进行了数值研究。
5)  numerical simulation
数值研究
1.
Experiments and Numerical Simulation on Oxygen-enriched Combustion and Direct Ignition of Pulverized Coal;
煤粉富氧燃烧和新型富氧燃烧器直接点火技术及数值研究
2.
Two-dimensional numerical simulation of the viscous compressible oscillating flow was carried out for the uniform cross-section and tapered pulse tubes by using a compressible SIMPLEC algorithm code developed by the authors.
本文开发了二维可压缩交变流动的SIMPLEC计算程序,对渐缩型锥形脉管制冷机进行了二维数值研究,研究了锥度对脉管制冷机性能的影响。
6)  numerical method
数值研究
1.
Numerical method is helpful to understand the mechanism of red tide and promote the development of red tide prediction.
赤潮的实质是一个海洋生态系统动力学问题,本文初步给出了描述赤潮的基本动力学方程组,并讨论了进行赤潮数值研究的必要性。
补充资料:蓄热式换热
分子式:
CAS号:

性质:工业中的换热方式之一。利用固体填充物贮蓄热量以达到换热目的。当气体通过时,根据气体的温度高于或低于填充物的温度,可将热量传给填充物或从填充物吸取热量。常用于冶金工业,也用于化学工业等。例如炼钢平炉和煤气炉常用来预热空气等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条