说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> Marquardt敏感度
1)  Marquardt sensitivity
Marquardt敏感度
2)  Marquardt sensitivity matrix
Marquardt灵敏度矩阵
3)  sensitivity [英][,sensə'tɪvəti]  [美]['sɛnsə'tɪvətɪ]
敏感度
1.
Study on the Chlorate Firecrackers Sensitivity;
关于氯酸盐炮敏感度的探讨
2.
Study on Sensitivity of Factors Influencing Surface Movement of Underground Metal Mines;
地下金属矿山地表移动影响因素敏感度分析
3.
Reliability and sensitivity of the Bath ankylosing spondylitis metrology index;
Bath强直性脊柱炎计量指数量表的信度和敏感度研究
4)  temperature-sensitive
温度敏感
1.
Study on the polymer microcapsules with temperature-sensitive;
具有温度敏感特性的聚合物微胶囊的合成及性能的研究
2.
Application of polymers in temperature-sensitive in situ gels;
聚合物在温度敏感型原位凝胶中的应用
3.
Synthesis and Properties of Novel Temperature-sensitive Self-assemble Nanomicelles of P(NiPAAm-co-DMAA)-co-P(L-Ala)
新型温度敏感性自组装胶束P(NiPAAm-co-DMAA)-co-P(L-Ala)的合成和性能
5)  Sensitive Temperature
敏感温度
6)  sensibility [英][,sensə'bɪləti]  [美]['sɛnsə'bɪlətɪ]
敏感度
1.
Through an analysis of the major process of residuum processing extensively adopted abroad, the article probes the economic feasibility of residuum processing project, and analyzes the sensibility of the factors relating to residuum processing.
通过分析国外广泛采用的主要渣油加工过程,探讨了渣油加工方案的经济可行性,并对渣油加工中关联因素的敏感度进行了分析。
2.
2 methods of response section and Monte Carlo are adopted, and the structure response of reinforced concrete beam is analyzed on its sensibility before and after the creaking of the tensile area.
概率将采用响应面法和蒙特卡罗法(MonteCarlo),并对钢筋混凝土梁在混凝土受拉区开裂前后的结构响应进行了敏感度分析,给出了影响开裂钢筋混凝土梁结构响应的主要随机变量。
3.
This new method measures the dependency between two tasks through sensibility and changeability, and numeralizes the bi-measur.
针对现有割裂规划方法的不足 ,本文提出了一套从构造到割裂数字双指标耦合任务集的系统化新方法 :用敏感度与可变度双指标表征任务间依赖关系 ,用基于层次结构法的两两比较技术数字化双指标耦合任务集 ;用基于次序指标的算法割裂数字耦合任务集。
补充资料:起爆敏感度


起爆敏感度
sensitivity to initiation

q Iboo mlngondu起爆敏感度(sensitivity to initiation)炸药在外界能量作用下,发生爆炸反应的难易程度。炸药敏感度的高低对炸药的加工制造、运输、贮存和安全使用都具有十分重要的意义。敏感度过高的炸药,加工和使用极不安全。相反,敏感度过低的炸药,需要很大的起爆能力才能起爆,给爆破施工带来很大麻烦。爆炸不完全或拒爆的炸药也是个不安全因素。 测定炸药敏感度的方法很多,矿山常用的方法有:(l)爆炸能感度测定法。测定炸药在爆炸能作用下发生爆炸难易程度,一般用保证炸药起爆的极限药量和殉爆的最大距离来表示。称量0.59或1.09的受试炸药,装人铜皮雷管壳内,在其上装人起爆药,用导火索引爆。根据铅板穿孔大小来判断受试药是否爆炸。通过增减起爆药的药量,即可测出该炸药起爆的极限药量。极限药量小,表明该炸药对爆炸能感度高;反之,则低。殉爆距离试验法,见殉爆。(2)冲击波感度测定法。测定炸药在冲击波作用下.发生爆炸的难易程度的方法。采用隔板试验法。由主动药包爆轰产生的冲击波,经过惰性隔板衰减使冲击波强度刚好能够引起被动药包爆轰,以隔板的厚度来表示被动药包对冲击波的敏感度敏感度指标为(n一澎)2,n为被动药包能100%爆轰的最大隔板厚度,、’为被动药包l(}()环不爆轰的最小隔板厚度。隔板材料可为塑料或金属,其厚度的误差不超过一。.2一+。.smm。这种方法对于冲击感度较低的矿用炸药最为适用。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条