说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 控制孔工艺
1)  control hole technology
控制孔工艺
2)  drill process
制孔工艺
3)  process control
工艺控制
1.
Production process control of barrel nickel plating of steel battery shell;
电池钢壳滚镀镍生产工艺控制
2.
Technical progress in copper electrolysis process control;
云铜铜电解生产工艺控制的技术进步
3.
Construction process control of concrete;
浅析混凝土施工工艺控制要点
4)  Technology control
工艺控制
1.
The productive technology control of the light curing laminated safety glass;
光固化安全夹层玻璃生产工艺控制
2.
Through cross experiment,dynamic observing and single factor optimization experiment, a new variety of iron system crystallization glaze was studied, its forming mechanism was researched in detail and the reasonable technology control condition of the glaze was in hand.
采用正交试验、动态观察及单因素优化试验的方法研制出了铁系结晶釉之一的幽邃银星装饰釉,对其形成机理进行了详细研究,并掌握了其合理的生产工艺控制条件。
3.
It was pointed out that leakage problems of alkaline Zn MnO2 battery could be solved through technology design and technology control.
从偶然因素和系统因素阐述了碱性锌锰电池几种可能产生漏液的类型,对产生漏液的原因进行了详细分析;指出可从工艺设计、工艺控制两方面着手解决碱性锌锰电池漏液问题;认为可从5个方面开展工作来降低碱性锌锰电池漏液比例。
5)  Technical control
工艺控制
1.
The potato granules' quality and production control have close relation, there adopt the backfill seasoning and other working procedures on stream, it can keep potato's flavor and nutrient content better Use scientific method to improve level of technical control and production control is a important condition to improve potato granules' quality.
马铃薯全粉产品品质与生产控制紧密相关,在生产工艺中采用回填、调质等工序处理,能更好保全马铃薯风味物质和营养成分;应用科学方法去探索和提高工艺控制及生产控制水平,是全面提高马铃薯全粉品质保障。
2.
In this paper, a new analytic option based on FHA method (the Method of Frequency and Hierarchy Analysis) for technical control of the ceramic factory is put forward in view of its production characteristics.
本文根据陶瓷厂生产工艺特点,运用FHA法即频率层次分析法,对陶瓷厂工艺控制提出了一种新的分析方法。
6)  technological control
工艺控制
1.
The effects of each technological factor on beer filtration in the whole brewing of beer were summarized and the corresponding technological control measures and laid particular emphasis on every new technique and new technology (for example brewing beer with low malting malt or wheat malt fermentation in out-door tank, etc.
总结了整个啤酒酿造过程中各个工艺因素对啤酒过滤的影响,并提出相应的工艺控制措施,特别侧重于各项新技术、新工艺(如用低发芽率麦芽、小麦芽酿酒、露天罐技术及酒龄缩短等)采用后给啤酒过滤造成不利影响的情况下,采取相应的工艺措施来提高啤酒的过滤性能。
2.
This paper provides antiseepage measures from aspects of materials, concrete mix proportion parameter and construction technological control in accordance with the construction characteristics of carcass concrete in thin-walled reinforced concrete tank.
本文针对钢筋混凝土薄壁水池主体混凝土施工的特点,从原材料选择、混凝土配合比参数确定和施工工艺控制等方面提出了防止渗漏的技术措施。
补充资料:常用打孔工艺

常用的打孔方法有:钻头钻孔,电火花加工打孔,激光打孔等


1、钻头钻孔
适合打大孔,直径在2MM以上的孔,且钻头易断,产品废品率较高。


2、电火花加工
打孔在0.2mm以上,加速度很慢


3、激光打孔
可以打0.1以上的孔,速度较快,深度不超过4MM

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条