1)  geometry
几何方向
1.
Aiming at this deficiency,an adaptive Bandelet frame is presented;the rule of selection of best geometry of image and building of image quadtree is regulated afresh for the image-denoising objective in this frame.
在Bandelet变换中噪声影响了对图像实际几何方向的寻找。
2)  geometry
几何
1.
Research on the Satellite s Geometry Attitude Determination;
卫星姿态的几何确定方法初探
2.
Method of detecting collision of spatial pipes based on geometry;
一种基于几何的空间管道碰撞检测算法
3.
Analysis on infiltration of alternating thought to geometry teaching;
浅析变换思想在平面几何教学中的渗透
3)  geometric
几何
1.
A method is presented to analyze the behavior of concrete-filled steel tubular (CFST) arch, which considers the material and geometric nonlinear property, and a finite element program.
提出考虑材料与几何双重非线性的钢管混凝土肋拱面内受力的计算方法并编制了有限元程序。
4)  Geometrical Condition
几何条件
1.
Applying the principle of the graph theory put for-ward the method which forms thegeometrical conditions of the contrl network tomatcally and then discussed thestransformation on contr-ol network to form base-line condition.
本文分析了控制网与图的内在关系,应用图论的原理给出了自动生成控制网几何条件的方法,并讨论了生成基线条件时对控制网的拓扑变换。
2.
This paper analyzes the closure error and tolerance of the geometrical condition existing in the plane control network,and based on the production practice,introduces some methods and experiences of making the check calculation of the closure error by using EXCEL.
分析了平面控制网存在的几何条件闭合差及其限差,并根据生产实际,介绍了利用Excel进行闭合差验算的一些方法和经验。
3.
To meet the needs that obstacles would be mounted in the tube to change the geometrical conditions and that the inner wall of the tube should be made repalceable by some porous materials for changing the physical boundary conditons, a specially designed testing section .
为开展边界物理和几何条件对气相爆轰波传播影响的系统研究,需要对已有的40×40mm方截面双层爆轰激波管进行改造。
5)  geometric factor
几何因子
1.
Normalized geometric factor in borehole condition and its application;
归一化的井条件下的几何因子及其应用
2.
Way of the cave effect correction of array induction logging based on geometric factor;
基于几何因子的阵列感应测井井洞影响校正方法
6)  geometric shape
几何形状
1.
In sharpening tool cutters there is a shortcut mainly based on the geometric shape,which is not only easy to learn, but also can be very precise.
学习刃磨切断刀完全可以走捷径,以几何形状入手的方法,不但入门快,而且不出偏。
2.
States the method of improving the joint strength by analyzing and researching the excessive coordination of the shaft plug and chain plate, geometric shape and tolerance of plate hole and shaft plug, chain hardness and the pressure in the coordination of the chain joint.
链节的联接固度对链条的使用寿命影响很大,通过对销轴与链板配合过盈量、链 板孔和销轴的几何形状误差、链板硬度、链节静配合连接中的比压等的分析研究,提高了 链节的连接固度。
3.
The modulation transfer functions (MTF) of CCD array with equal sampling area but different geometric shapes of pixel are analyzed and simulated by the CCD sampling theory in the case of hexagonal and rectangular shapes.
本文从 CCD的采样理论出发 ,以六角形和矩形像元为例 ,对具有相同采样面积但像元几何形状不同的阵列的调制传递函数 (MTF)进行了理论分析和数值模拟。
参考词条
补充资料:原始几何陶与几何陶文化
      希腊的早期铁器时代文化。因陶器多饰几何形图案而得名。年代约在公元前第2千年末至前第1千年初。此时以多里安人为主的移民消灭了迈锡尼国家(见迈锡尼文明),但未继起建国,氏族部落制度重新占据统治地位。记载这一时期历史的主要文献是荷马史诗,故亦称此时期为荷马时代。几何形陶器自19世纪末即有发现,但作为考古学文化而定名则是在20世纪初。
  
  原始几何陶的特征是喜用多管笔在器物上绘平行线纹、波浪纹和同心圆圈图案,条理分明,简略得当。器形多为双耳水罐。几何陶由原始几何陶发展而来,其特征是图案装饰横带遍布器表,不象原始几何陶在器腹中部和底部留有空白,并开始在几何纹中杂以鸟、马等动物图像。此时制陶技术续有提高,在土质、火候、釉色等方面都可居古代制陶工艺的上乘。几何陶文化后期最有代表性的是"狄甫隆陶瓶",它得名于雅典古城遗址的狄甫隆门。这类巨型陶器往往高与人齐,在腹部最宽的横带上绘人物、车马,以表现送葬行列、战斗场面等为主。该文化铁器已很完善,有斧、钻、锯、锄等工具和刀、剑、矛等武器。青铜器主要有用于装饰的别针。商业已较发达。该文化中心之一的雅典,受移民破坏最轻,又较早恢复了海外联系,与小亚细亚、塞浦路斯和爱琴海各岛接触频繁,铁器生产和快轮制陶技术都达到较高水平。
  
  该文化的遗迹主要是墓葬,流行火葬,但土葬仍未绝迹,一般是单人墓穴。在原始几何陶时期,陪葬品只有陶器和少量铁制用具、饰物;到了几何陶时期,始有金、银工艺品。贵族墓葬日渐豪华,在雅典古市场遗址发现的1座贵族妇女火葬墓,随葬珍贵饰物和陶器达80件以上,并有一谷仓模型。到几何陶文化后期,阶级分化日益加剧,进入奴隶制城邦的形成时期。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。