说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 细节点匹配
1)  minutiae matching
细节点匹配
1.
Fingerprint minutiae matching algorithm based on line pattern;
基于线模式的指纹细节点匹配算法
2.
To improve the performance of automatic fingerprint recognition and promoting its application, the dissertation discusses the problems of fingerprint minutiae extraction, fingerprint minutiae verification and fingerprint minutiae matching, using the knowledge of digital image processing, pattern recognition and computational i.
针对指纹识别目前所面临的问题,本文对其中的细节点关键算法进行了深入研究,具体包括指纹细节点提取、验证和细节点匹配算法。
2)  minutia matching
细节匹配
1.
Focus on the minutia matching algorithm which is important in automated fingerprint identification systems(AFIS).
对自动指纹识别系统(AFIS,Automated Fingerprint Identification Systems)中居于重要地位的细节点匹配算法进行研究,对基于校准的细节匹配算法进行了修正。
3)  minutiae matching
细节匹配
1.
In minutiae matching stage, the optimal alignment parameters are obtained from similarity histogram.
指纹的细节匹配部分通过相似度直方图函数来计算最优校准参数,并且将校准结果应用到纹理匹配中。
2.
A fingerprint verification based on fuzzy discrimination is proposed in this paper which can modify the minutiae matching algorithm put forward by Jain et al,and better solve the prob.
利用模糊判别技术提出了一种指纹识别方法 ,改进了 Anil Jain等提出的细节匹配算法 ,有效地解决了图像质量很差时经常检测到很多伪细结点而丢掉很多真细结点、细节匹配难有大作为的情况。
4)  joint matching
关节点匹配
5)  peer match degree
节点匹配度
1.
According to the query,based on document match degree,proposed the concept of peer match degree,and based on peer match degree and small world character of resource,proposed a new arithmetic to search and rank resource.
根据搜索条件,在资源匹配度的基础上提出了节点匹配度的概念。
6)  Fingerprint Minutiae Matching
指纹细节匹配
1.
Research on Algorithm of Minutiae Direction in Fingerprint Minutiae Matching;
指纹细节匹配中细节点方向算法研究
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条