说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 变形极限状态函数
1)  deformation limit state function
变形极限状态函数
1.
The method of numerical calculus was combined with recurrence formula,to generate deformation limit state function of continual variational structure.
基于我国《建筑结构设计统一标准》的极限状态设计原则 ,结构物不允许出现影响正常使用的外观变形 ,提出了刚架结构位移连续变更方法·用数值分析与递推公式相结合的方法 ,实现连续变更结构的变形极限状态函数的连续生成·重分析不必重新形成结构刚度矩阵 ,不必反复求逆矩阵 ,使得识别系统主要失效模式的方法得以简化 ,有效地提高了计算时效 ,并为刚度可靠性分析提供了新方法·算例验证了方法的正确性及实用性
2)  limit state function
极限状态函数
1.
The partial derivatives of the limit state function to each variable can be obtained from the global stiffness matrix and the load vector of the initial structure,which is advantageous for deve.
因此,在基于随机有限元的可靠性分析过程中,不必反复修改刚阵和进行反向节点力的增加,在极限状态函数对设计变量求导过程中,导数形式只用到了原结构总刚度矩阵和原结构外载向量,这对编写电算程序是有益的。
2.
In order to establish the limit state function,a buried pipeline is considered as a foundation beam to account the interaction between the pipeline and subsoil deformation due to seismic wave.
将直埋管线看作地基梁,考虑它和地震波引起土层位移的相互作用,建立极限状态函数。
3.
The limit state function can be fitted by artificial neural network and its value can be generated by function mapping relation of neural netwok for the structure reliability analysis.
在结构可靠性分析中,通过人工神经网络拟合极限状态函数,借助神经网络的函数映射关系产生极限状态函数值。
3)  implicit limit state function
隐式极限状态函数
1.
To estimate failure probability of nonlinear implicit limit state function, a support vector machine (SVM) method is presented in conjunction with weighted linear response surface method (WLRSM).
针对估算非线性隐式极限状态函数的失效概率问题,提出了一种基于加权线性响应面法的支持向量机可靠性分析方法。
2.
For reliability analysis of structure with implicit limit state function,an iterative algorithm was presented on the basis of support vector classification machine.
针对结构隐式极限状态函数的可靠性分析,提出了一种支持向量机分类迭代算法。
4)  limit state function of the displacement
位移极限状态函数
1.
It is used to continually generate limit state function of the displacement for continual variation structures.
在结构拓扑不断变更情况下,实现连续变更结构的位移极限状态函数的连续生成,避免了总刚反复组装、求逆,简化了识别系统主要失效模式方法,并与我国建筑结构设计规范相吻合。
5)  liquefaction limit state function
液化极限状态函数
1.
The liquefaction limit state function of saturated sandy soils during an earthquake and the probability function are given in the paper.
利用BP神经网络模型和可靠度理论对我国大量液化和未液化场地标准贯入试验数据进行分析,得到了地震时饱和砂土液化极限状态函数和液化概率函数。
6)  reconstruction of limit state function
极限状态函数重构
1.
Support vector machines(SVM) was introduced to structural reliability analysis as a tool for reconstruction of limit state function.
将支持向量机作为极限状态函数重构的工具引入结构可靠性分析问题中,并结合蒙特卡洛方法,分别给出了模式识别型和函数回归型两种支持向量机(SVM)模型应用于结构可靠性分析的计算流程图。
补充资料:状态函数
分子式:
CAS号:

性质:也称热力学函数(thermody-namic function)。热力学系统的状态是用它的一组宏观性质来描述的。用于描述系统的任一种性质发生变化,系统的状态就发生变化,系统的其他有些性质也要随之变化。因而系统的这些宏观性质是系统状态的函数,而且是单值函数,即状态确定之后,每一性质只可能有惟一确定的值。因此,这些性质(如温度、体积、内能和熵等)称为状态函数。状态函数在热力学过程中的改变值只与始态和终态有关,与系统变化所沿的途径无关,用数学式表示,对状态函数 ,其中△X为X值的增加,Xl及X2分别为始态及终态的X值。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条