说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 流量跟踪
1)  Flow tracing
流量跟踪
2)  tracing of direct current
直流分量跟踪
3)  flow tracer routine
流量跟踪程序
4)  current tracking
电流跟踪
1.
The nonlinear decoupled control、MPPT technology、space vector PWM control、current tracking method are adopted in system,it can adjust power factor on grid,and have wide voltage r.
系统采用非线性解耦控制策略及最大功率寻优、空间矢量PWM控制,进行电流跟踪,可调节电网功率因数,且电压适应范围宽。
2.
Aiming at the shortcomings of PI controller,this paper engaged in improving the control of photovoltaic grid-con-nected inverter and put forward a current tracking control strategy which combines PI control with repetitive control.
针对单纯PI控制的缺点,对光伏并网系统中逆变器的控制进行了改进,提出重复控制和PI控制相结合的电流跟踪控制策略。
3.
Taking a new injection type hybrid active power filter as an example, this paper proposes a new technology for eliminating switching ripples with adopting the synthesis control algorithm for current tracking, attaching the SVPWM based on random PWM and installing the output filter desig.
本文以一种新型注入式混合有源滤波器为研究对象,通过采用三重开关谐波抑制技术:采取复合型电流跟踪控制算法、选用基于随机脉冲位置的SVPWM调制策略、安装优化设计得到的输出滤波器,实现了工程应用项目所提出的开关谐波抑制目标。
5)  power flow tracing
潮流跟踪
1.
A pricing mechanism of the electricity market based on power flow tracing;
基于潮流跟踪的电力市场电价研究
2.
A power flow tracing based load shedding model for reliability evaluation of large scale power grid is proposed and a calculation model for distribution of reliability indices of bus and system to components is built, on this basis the weak links of power grid can be easily found out.
提出了大电网可靠性评估中削减负荷的潮流跟踪模型, 建立了节点和系统可靠性对元件的分配计算模型,基于此易于分析系统的薄弱环节。
3.
Traditional approach separates loss allocation from power flow tracing and needs to approximate the net power flow.
潮流跟踪算法是输电成本分摊的重要方法。
6)  current track
电流跟踪
1.
Research on control system of matrix converter with current track control based on dSPACE;
基于dSPACE的电流跟踪控制的矩阵变换器控制系统研究
2.
With the mathematic model of shunt APF in three-phase stator coordinates set up in this paper, it is found by calculation analysis that there is a period disturbing signal in the current closed loop transfer function of the general PI control, and the disturbing signal influences the performance of current track distinctly.
结果表明,该补偿PI控制方法提高了APF的电流跟踪性能。
补充资料:理想流量计试探与流量仪表的选用
理想流量计试探
  
  1.检测件无阻碍物;
  2.检测件可夹装在管道外部,可随意移动在任何地点测量而无须截断管道与流体;
  3.仪表的流量计算方程简单明确,可外推到未知领域而无须实流校验;
  4.频率脉冲输出信号,数字式仪表,便于远传抗干扰及与计算机联网;
  5.仪表输出信号不受流体介质物性的影响;
  6.仪表输出信号不受流体流动特性的影响;
  7.仪表复现性高;
  8.仪表范围度宽,线性好;
  9.仪表可靠性高,价格适宜,维修技术不复杂;
  10.无须个别实流校验,或只须“干校”,或在一、二种介质中校验可推广到各种介质;
  11.检测件输出信号直接反映质量流量。

  可以说至今并没有出现上述的理想流量计,所有流量计都多少具备一些上述条件,只不过有的多些,有的少些。所有流量计制造厂试制新产品都力图能更多地具备上述条件。


流量仪表的选用
  
   流量仪表的选型对仪表能否成功使用往往起着很重要的作用,由于被测对象的复杂状况以及仪表品种繁多,产品质量难以掌握等情况,使得仪表的选型感到困难。没有一种十全十美的流量计,各类仪表都有各自的特点,选型的目的就是在众多的品种中扬长避短,选择自己最合适的仪表。

   一般选型可以从五个方面进行考虑,这五个方面为仪表性能方面、流体特性方面、安装条件方面、环境条件方面和经济因素方面。五个方面的详细因素如下:  

  1.仪表性能方面

  准确度、重复性、线性度、范围度、流量范围、信号输出特性、响应时间、压力损失等;

  2.流体特性方面

  流体、温度、压力、密度、粘度、化学腐蚀、磨蚀性、结垢、堵塞、混相、相变、电导率、声速、导热系数、比热容,等熵指数;

  3.安装条件方面

  管道布置方向,流动方向,检测件上下游侧直管段长度、管道口径、维修空间、电源、接地、辅助设备(过滤器、消气器)、安装、脉动等;

  4.环境条件方面

  环境温度、湿度、电磁干扰、安全性、防爆、管道振动等;

  5.经济因素方面

  仪表购置费、安装费、运行费、校验费、维修费、仪表使用寿命、备品备件等。


  仪表选型的步骤如下:

  1. 依据流体种类及五个方面考虑因素初选可用仪表类型(要有几类型以便进行选择);
  2. 对初选类型进行资料及价格信息的收集,为深入的分析比较准备条件;
  3. 采用淘汰法逐步集中到1-2种类型,对五个方面因素要反复比较分析最终确定预选目标。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条