说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 参数在线自调整
1)  fuzzy control of online adjusting parameter
参数在线自调整
1.
This paper puts forward a new-style fuzzy control way by uniting fuzzy control of online adjusting parameter and intelligent control.
针对间歇式热处理炉温度控制对象的特性要求,提出了参数在线自调整模糊控制与智能积分相结合的一种新型模糊控制方法。
2)  on-line parameter tuning
在线参数调整
1.
The paper presents a method to realize an on-line parameter tuning in real time control system.
基于RTW的外部模式,实现了实时控制系统的在线参数调整。
3)  realtime adjustment of parameter
在线调整参数
4)  online tuning
参数在线调整
5)  parameters on line modifying
参数在线自整定
1.
In consideration of the changeability of rubbish ingredient and non linearity, time variation and unsteadiness in burning process of destructor, a self optimization controller with three dimensional fuzzy having parameters on line modifying function, was designed and applied to retrofit control system in Shenzhen Refuse Incineration and Multi Treatment Plant.
分析了影响垃圾焚烧炉燃烧稳定性的主要因素 ,考虑到垃圾特性的复杂多变以及垃圾焚烧炉燃烧过程的非线性、时变性和不确定性 ,设计了具备参数在线自整定功能的三维模糊自寻优控制系统 ,并将系统应用于深圳市市政环卫综合处理厂燃烧控制系统改造中 ,实践表明 ,该系统使垃圾焚烧炉运行状况得到了优
6)  on-line self-adjustment
在线自调整
1.
An improved PI controller adopting on-line self-adjustment technique of proportional control and recursive integral control is proposed to regulate the active part absorbing or releasing active power.
针对注入式混合有源电力滤波器(HAPF)实际应用过程中出现的电网基波和谐波电压致使有源部分分压过高并向其传送能量,从而与逆变器产生的电网谐波补偿能量相抑制形成能量脉动,并导致直流侧电压的波动乃至抬升的现象,建立了有源部分逆变器两侧的能量平衡数学模型,在此基础上提出了基于比例增益在线自调整结合递推积分的改进型PI控制器,控制有源部分吸收或释放一定的有功功率,结合检测注入支路回灌谐波电流控制逆变器产生与之相反的抑制电流来抑制能量脉动,然后联合电网谐波电流跟踪控制以获得系统参考信号。
2.
This paper aims at the computer process control system , introducing on-line self-adjustment paramenter fuzzy controller and applying to control the liquid-position,temperature.
本文针对微机过程控制系统,介绍了在线自调整参数模糊控制器,并将其应用于液位、温度等控制。
补充资料:模具加工时FANUC先行控制相关参数调整

一、0MC/0MD 
  
参数号码       参数含义           典型设定       备注
45#3        切削进给插补后直         1         635为时间常数
             线加减速有效
393#0      自动拐角降速功能有效      1         如果拐角要求
                                                高时设1 395#2      切削进给插补后直线加      1
           减速有效(先行控制)
395#3      依速度差控制拐角降速      1         482,483,
                                                487设定
395#6       插补前直线加减速         1
             类型B有效
399#2      前馈控制对切削进给                   通常设0
            和快移均有效
399#4      依进给类型的在位检        0

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条