说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 胶原溶胀液浓度
1)  collagen solution concentration
胶原溶胀液浓度
2)  composite collagen dispersion
复合胶原溶胀液
1.
The experimental results show that the composite collagen dispersion behaves pseudo-plastic fluid.
实验结果表明,复合胶原溶胀液具有假塑性流体的特性。
3)  silica concentration
溶胶浓度
4)  strong solution concentration
浓溶液浓度
1.
Concludes that the severe cracking of heat exchanger tube of the high temperature heat exchanger results in the decrease of cooling capacity according to the analysis of strong solution concentration.
通过对浓溶液浓度的分析,得出溴化锂冷水机组制冷效果不佳是高温换热器传热管大面积破裂所致,给出了具体的处理方法。
5)  solution concentration
溶液浓度
1.
Influence of absorption pressure, solution concentration, temperature and flow rate of the cooling water in the lithium bromide absorption chiller on the absorption process;
吸收压力、溶液浓度、冷却水温度和流量对溴化锂吸收式制冷机吸收过程的影响
2.
Improvement of measuring the salt solution concentration by laser speckle method;
用激光散斑法测盐水溶液浓度的改进
3.
To eliminate the measurement errors arisen from light source intensity and wavelength fluctuation,a method of measuring solution concentration by glancing incidence was proposed.
提出用掠入射法测量溶液浓度的方法,该法不受光源强弱和波长变化的影响,测量环境宽松。
6)  concentration of solution
溶液浓度
1.
Determining the concentration of solution based on the virtual oscillograph;
基于虚拟示波器动态判别溶液浓度
2.
In this paper,a fiber-optical sensor that uses optic-fiber collimator as optical system of the expended beam and couple,and uses the way of low frequency light modulation for measuring concentration of solution is introduced.
介绍一种利用光纤准直器作扩束耦合光学系统,采用低频光调制方式测量溶液浓度的光纤传感器。
3.
Based on the principle of ultrasonic grating,the relationship between velocity of ultrasonic wave and the concentration of solution is studied for salt solution(NaCl)and glucose solution(C6H12O6).
利用超声光栅测量声速原理,针对不同浓度的食盐(NaCl)和葡萄糖(C6H12O6)溶液,详细研究了超声波声速与溶液浓度的关系。
补充资料:抗溶胀性
分子式:
CAS号:

性质:固体浸渍于液体或暴露于蒸气中尺寸不变化的能力。当固体高聚物浸渍于溶剂,溶剂分子会渗入高聚物内部。随后,线型高聚物分子会均匀分散在溶剂中,逐渐形成完全溶解的分子分散的均相体系。对于交联的高聚物,因有交联的化学键束缚,不能再进一步使交联的分子拆散。交联度大的高聚物溶胀度小,交联度小的高聚物溶胀度大。也可以用物理的方法,比如在木材表面涂漆来阻止水分的进入材质,从而也就提高了这一构件的抗溶胀性。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条