说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 内部工作参数
1)  internal operating parameters
内部工作参数
2)  intrinsic parameter
内部参数
1.
A new method of direct calibration for intrinsic parameters of camera is introduced in the paper.
从理论上提出了一种新的直接标定摄像机内部参数的算法。
2.
Only one coordinate system is needed for plane-based calibration of object through directly calibrating camera s intrinsic parameter.
通过直接标定摄像机内部参数的算法,对基于平面标定物体,只需要一个坐标系。
3.
Through corner extraction and circular points calculation,the camera s intrinsic parameters can be obtained linearly,and its extrinsic parameters can also be calculated.
它要求摄像机在至少三个不同的方位对模板进行拍摄,通过对模板图像的角点的提取,计算圆环点的图像坐标,从而可以线性求解出摄像机的全部内部参数,进而可以求取摄像机运动的外部参数。
3)  intrinsic parameters
内部参数
4)  internal parameters
内部参数
1.
The most important part of the algorithm is the initial value of external parameters and distortion-free internal parameters through the first step.
该算法的关键是第一步计算出来的外部参数和与畸变无关的内部参数的初值。
2.
A novel method is presented to measure the internal parameters of electrooptically Q switched RF excited waveguide CO 2 laser.
提出了一种测量电光调 Q射频波导 CO2 激光器内部参数的新方法 ,采用此方法可测量出激光器的小信号增益系数、内部损耗、饱和光强等内部参数 ,并可推广应用到其他种类激光器内部参数的测量。
3.
06 μm high power CW semiconductor laser was chosen through the comparison between two kinds of material internal parameters which were obtained by LIV tests for different cavity length semiconductor laser diodes.
利用金属有机化学气相淀积(MOCVD)技术,生长了InGaAs/AlGaAs分别限制压应变双量子阱和单量子阱两种材料结构,通过对不同腔长单管激光器的LIV测试获得内部参数,对单、双阱两种材料结构器件参数进行对比分析,确定了单量子阱结构作为1。
5)  internal parameter
内部参数
1.
A thermodynamics-based fault diagnosis method is presented,in which variations of the internal parameter θ and the dissipation temperature Td are used for calculation and fault diagnosis.
介绍了一种基于热力学的故障诊断方法——由内部参数θ和耗散温度Td的变化来对汽轮机数据进行计算并诊断是否出现故障。
6)  Working parameters
工作参数
1.
Optimal design of shearer’s working parameters;
采煤机工作参数的优化设计
2.
Design of GPR working parameters for railroad trackbed inspection;
铁路路基雷达探测工作参数的设计
3.
Analysis and choice of working parameters in jet prototype based on droplet;
微小熔滴喷射成型中工作参数的分析与选择
补充资料:内部审计工作经常化、系统化和规范化


内部审计工作经常化、系统化和规范化


内部审计工作经常化、系统化和规范化对内部审计工作的总要求,是提高内部审计工作效率,保证内部审计工作质量的客观要求。1.内部审计工作经常化,指建立内部审计工作的正常秩序,经常开展内部审计工作。经常化的主要内容是:①审计机构或审计人员要连续不断地开展审计工作,保持其连续性和稳定性。②审计对象都应受到审计监督:2.内部审计工作系统化,指对内部审计活动的组织、指导、控制和监督等工作的系统化,形成一套完整的内部审计业务和管理制度系统系统化的主要内容是:①从部门到单位都应当设立内部审计机构②建立内部审计准则,使之成为内部审计工作的一般守则.审计少、员必须执行,具有很强的约束力③制定并完善有关内部审计工作的政策、法规、制度、办法,形成统一、协调、配套的内部审计业务和管理工作的政策法规体系。④建立完整的内部审计理论体系,指导内部审计实践活动。3.内部审计工作规范化,指对内部审计工作的原则、程序、方式、质量标准、技术方法、文书档案等都要制定出统一的,可操作的规范要求,做到按规定行事。经济化、系统化和规范化既是内部审计工作的客观要求,也是内部审计工作的发展方间
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条