说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 扫描激光
1)  scanning laser
扫描激光
1.
On the basis of the systematic analysis and study on the arithmetic using scanning laser to measure the position of a aircraft in the process of anatomists,the arithmetic using four reflectors to measure the pose of the aircraft is put forward.
对空间飞行器交会对接过程中的扫描激光测量算法进行了系统的分析和研究 ,提出了一种利用四反射镜测量飞行器位置和姿态的算法。
2)  Laser scanning
激光扫描
1.
Research on laser scanning-based three-dimensional reconstruction of face soft tissue;
基于激光扫描的人脸软组织三维重建研究
2.
Initial application of laser scanning for three-dimensional reconstruction and anthropometrics of facial deformity;
激光扫描在面部畸形三维重建及测量中的初步应用
3.
Laser Scanning Technology and Its Application in Backward Engineering;
激光扫描技术在逆向工程中的应用
3)  laser scan
激光扫描
1.
Study of checking system of reflecting laser scan;
反射式激光扫描检测系统研究
2.
Automatic best viewpoint determination method for 3-D laser scanning;
最佳视角3-D激光扫描路径的自动确定方法
3.
Discussing the application of 3D laser scan technology in old architecture;
三维激光扫描技术在古建筑保护中的应用
4)  laser-scanning
激光扫描
1.
Research on Laser-scanning Measurement Technology Apply in Free-from Surface of Rapid Reverse Engineering;
激光扫描测量技术在自由曲面快速反求工程中的应用研究
2.
The recent advances in developments and applications of laser-scanning photoelec-trochemical microscopy techniques have been reviewed,incltiding experimental methods andtheir uses in the studv of metal-oxide electrodes,surface lnodification of semiconductor elec-trode,photoelectrochemical corrosion and electrodeposition of photoelectrochemical-activematerials.
综述了激光扫描光电化学显微技术及其在研究金属氢化膜、半导体电极表面修饰、光电化学腐蚀和光电活性物质电沉积过程的应用。
3.
Based on the laser-scanning inspecting principle and optoelectronic sensor technigue, a quartz-tube thickness laser-scanning on-line inspection system was presented.
基于光电传感和激光扫描检测技术 ,本文提出了一种石英管壁厚激光扫描在线检测系统 ,采用激光后扫描方法对以一定角度入射到石英管侧面 ,经其内外表面反射后的两束激光光束的空间位置进行测量 ,解决了石英管壁厚非接触在线测量问题。
5)  laser scanner
激光扫描
1.
Image Reconstruction from Unorganized Range Data Based on Laser Scanner Aided Stereo Photography;
基于激光扫描辅助立体摄影的无规则物体的三维重建
2.
A kind of laser scanners based real-time trajectory measurement system for mobile robot is proposed.
设计了一种移动机器人实时轨迹测量系统,主要包括激光扫描仪、数据采集计算机、无线通讯网络和数据处理显示软件4个部分。
3.
An integrated method of laser scanner and rapid prototyping technology for prosthesis fabrication is presented in this paper.
文章介绍了一种基于激光扫描和快速成形技术制作假体的方法。
6)  laser scanner
激光扫描仪
1.
Precision evaluation of RIEGL LMS-Q140i-80 laser scanner;
RIEGL LMS-Q140i-80激光扫描仪精度评定
2.
The processing methed of data tested by laser scanner and reconstruction technology of CAD model in the reverse process of free-form surface were persented with toy of dog head as example.
针对复杂曲面数据测量及曲面重构的要求,以玩具狗头为例,介绍使用三维激光扫描仪的自由曲面反求过程中产品点数据的处理方法,以及CAD模型的重构技术,分析了反求建模中存在的问题。
3.
The processes and methods to design mould and manufacture it rapidly based on inverse engineering technology were presented by using laser scanner and Surfacer,Pro/Engineer,Mastercam software with glasses frame as example.
以眼镜框模型为例,利用激光扫描仪以Surfacer、Pro/Engineer、M astercam软件为平台,介绍基于逆向工程实现模具快速设计与制造的过程和方法,阐明了逆向工程技术应用的一般程序如数据获取及处理、外观造型设计、模具设计与制造的技巧及常见问题的解决方法。
补充资料:激光扫描成像型照排系统
      20世纪70年代出现的新型排版系统。简称激光照排系统。曾先后出现过二维行扫描及平面线扫描 2种类型。后者如Lasercomp 3000型,结构较为简单,性能稳定,自1976年面向市场以来已大量生产,供应到欧、美、大洋洲及中东、远东地区。该系统由输入、电子计算信息处理和激光扫描记录 3个部分组成,输入部分可以用纸带或软磁盘等,也可接受由通信系统的输入。信息处理部分由操作控制台、电子计算机和硬磁盘驱动器组成,按照输入代码和操作控制指令,完成控制、编排、拼排和曝光 4个主要程序,并对整机起着控制、指挥、调度和监视的作用。激光扫描记录部分由激光平面线扫描主机记录经计算机处理后输出的点阵字形信息。由氦 -氖激光器输出的激光束(γ=6328┱)进入声光调制器输出的载有字符信息的一级光,作为记录光束,经中性滤色片调整到各种感光胶片所适应的能量,再经扩束器使光束准直,然后投射到锥形多面转镜扫描器上反射出来;又经广角聚焦透镜在感光材料上形成光斑沿 X向扫描,同时输送机构带动胶片作 Y向位移,组合成文字图像。
  
  
  
  与第 3代阴极射线管型机相比,其优点是:①激光束直线性好,解像力可达每厘米 400线以上,字符清晰度高。②排出的字符不是单个而是整版。由于采用激光调制方法,操作灵活,不但能正向、反向、阳图、阴图排版,还可以使正文版面转动角度,以及执行复杂的版式指令。因此一些生产第 3代机的工厂,也先后从事研制激光扫描型机。
  
  截至1984年底,全世界已有 8家工厂生产11种机型(见表)。其中中国研制的华光型计算机-激光汉字照排系统,由原电子工业部计算机管理局主持,北京大学汉字信息处理技术研究室负责总体设计,与山东潍坊电子计算机厂、杭州通信设备厂、无锡电子计算机厂、福建计算机研究所和新华社技术部研究所及印刷厂等协作,1981年研制成功,1983年完成改型投产。 该系统采用大规模集成电路, 主机为DJS-153型,配备照排控制机2台,为AM2900型,由位片微处理机构成,作为文字字形高速生成和控制之用。记录为4束平行受控激光扫描,分辨率达29.2线/毫米。有字体11种,每种收字7000余,可排6~68点的16种字号及科技符号、图文、花边等。除系统的联机和脱机终端具有增、删、改、段落分合等和自动遵守禁排规则外, 其最大特点是可压缩字形信息到10~20分之一,以加快汉字排版速度。
  
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条