1) 316L
316 L
2) AISI 316 steel
316钢
1.
The AISI 316 steel samples were annealed at 900℃ in air furnace firstly,and then annealed at 600 ℃ in air and vacuum furnace(1.
对316钢试样首先在空气炉中加热到900℃进行退火,然后将其分成两组,分别在空气炉和真空炉(1。
3) 316 stainless steel
316不锈钢
1.
Protection of organic silicon coating on 316 stainless steel;
有机硅涂层对316不锈钢的防护
2.
The basic principle and processes of a new fabrication technique,Selective Laser Sintering,were presented for the fabrication of 316 stainless steel with lotus root-shape structure in this paper.
利用SEM分析了316不锈钢藕状多孔试样的微观孔隙特征,并测定其孔隙率,结果表明其孔径大小分布均匀(2～4μm),平均孔隙率约为60%,孔隙贯通性良好;初步探讨了选区激光烧结制备316不锈钢藕状多孔结构的成形机制。
3.
Results show that the material is 316 stainless steel,and the failure was due to pitting induced by chloride which was enriched from the enviroment in the medium in local areas of it.
结果表明,该管的材质为316不锈钢;失效原因是由于在其管外壁的局部环境中氯化物的富集而发生点蚀,进而引发管子应力腐蚀开裂,最终造成管内氢气的泄漏。
4) No.316 National way
国道316线
5) Youyou 316
优优316
1.
Breeding of High-yielding and Disease-resistant New Hybrid Rice Combination Youyou 316;
高产抗病杂交水稻新组合优优316的选育
6) 316/316L steel
316/316L钢
补充资料：316L不锈钢纤维
316L不锈钢纤维
一噢撒 乙}6L不锈钢纤维
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条