说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> BRDF几何参数
1)  direction of geometrical parameter of BRDF
BRDF几何参数
2)  geometric parameter
几何参数
1.
The effects of geometric parameters on axial shortening of inertia friction weldment in ring form;
几何参数对环件摩擦焊接轴向缩短量的影响
2.
Discussion about relationship between geometric parameters and grinding parameters of hyperboloid twist drill;
双曲面麻花钻几何参数与刃磨参数关系探讨
3.
Influence of the Geometric Parameters of the Molded Lines of Scroll Compressors on Their Friction Loss Power;
涡旋压缩机型线几何参数对其摩擦损失功率的影响研究
3)  geometrical parameters
几何参数
1.
Some information of both electronic and geometrical parameters of these compounds were employed for their structural characterization.
利用电子参数(X_G)、几何参数(X)分别对40个酯、24个硫酯化合物进行结构表征并与其水解速率常数(k)建立多元线性定量构效相关(QSPR)模型:logk=a+b∑X_G+c∑X(式中a、b、c为系数)同时运用逐步回归结合统计检测对模型变量进行筛选,最后对所得模型稳定性能进行了深入分析和检验。
2.
It is necessary to extract molten pool geometrical parameters in real time or to extract back bead width off-line either in seam tracking or in penetration control.
不论熔透控制还是焊缝跟踪 ,都需要实时或离线提取焊接熔池正面或反面的几何参数 。
3.
Based on the coal impact breaking mechanism of impact coal cutter and considering the requirement of coal lump rate and dust etc, the determination of geometrical parameters of the impact tools has been analyzed.
根据冲击式采煤机的破煤原理 ,结合煤炭生产中对煤体块度、粉尘量、能量损失等方面的要求 ,分析了冲击式采煤机刀齿几何参数的确定方
4)  Geometry parameter
几何参数
1.
17 molecular structures based on 2-OH azobenzene crystal structure data which retrieved from CSD have calculated and analyzed to their geometry parameters using FORTRAN program written by ourselves.
从剑桥晶体结构数据库(CSD)中系统地提取了17个邻羟基偶氮苯的晶体结构数据,用自编的FOR TRAN程序对它们的几何参数进行了计算。
2.
The applicable machining materials of PCBN cutting tools and rational selection methods for geometry parameters, cutting data and insert brands of PCBN cutting tools are introduced.
介绍了PCBN刀具适用的加工材料以及刀具几何参数、切削用量、刀片牌号的合理选择方法 ,针对PCBN刀具在实际加工中的常见磨损、破损形式提出了具体改善措
3.
The geometry parameters for electrical railway contact wire, height,stagger,etc, and the measurement principles are ex-plained.
介绍了电气化铁路接触网导高、拉出值等几何参数的意义和测量原理,提出了一种基于嵌入式系统的接触网多参数测量仪的设计方案,采用激光测距仪、旋转光栅编码器及辅助器材测量各几何参数,在液晶屏上显示计算结果。
5)  geometrical parameter
几何参数
1.
Auto optimizing geometrical parameters of single lenses;
单透镜几何参数的自动优化设计
2.
The rational geometrical parameter are confirmed from the analysis of the cutting parameter and the boring quality and favorable effect are obtained in the practical manufacture .
通过对切削参数和孔加工质量的分析 ,确定了BTA钻头合理的几何参数 ,并已在实际生产中取得了良好的效果。
3.
And the conclusion of the geometrical parameters in this part of screw was enduced.
以科学假设为基础 ,建立了单螺杆注射机加料段固体塞的力学模型 ,据此讨论了该段螺杆的几何参数 ,并给出了不同的几何参数在不同的取值范围内对加料段输送能力的影响 ,对注射机的发展具有理论指导意
6)  Geometric Parameters
几何参数
1.
Study on the OCS Geometric Parameters Inspection System Based on Non-Contact Mesurement;
非接触式接触网几何参数检测系统研究
2.
Effect of geometric parameters on performance of counterflow thrust vectoring nozzle
几何参数对逆流矢量喷管性能的影响研究
3.
This research studies the geometric parameters which influence the armhole-sleeve of male suits.
分析了影响男西服袖隆部位的几何参数,研究了结构数据和成品外观参数之间的相互关系,提出了它们之间稳定的关联式。
补充资料:原始几何陶与几何陶文化
      希腊的早期铁器时代文化。因陶器多饰几何形图案而得名。年代约在公元前第2千年末至前第1千年初。此时以多里安人为主的移民消灭了迈锡尼国家(见迈锡尼文明),但未继起建国,氏族部落制度重新占据统治地位。记载这一时期历史的主要文献是荷马史诗,故亦称此时期为荷马时代。几何形陶器自19世纪末即有发现,但作为考古学文化而定名则是在20世纪初。
  
  原始几何陶的特征是喜用多管笔在器物上绘平行线纹、波浪纹和同心圆圈图案,条理分明,简略得当。器形多为双耳水罐。几何陶由原始几何陶发展而来,其特征是图案装饰横带遍布器表,不象原始几何陶在器腹中部和底部留有空白,并开始在几何纹中杂以鸟、马等动物图像。此时制陶技术续有提高,在土质、火候、釉色等方面都可居古代制陶工艺的上乘。几何陶文化后期最有代表性的是"狄甫隆陶瓶",它得名于雅典古城遗址的狄甫隆门。这类巨型陶器往往高与人齐,在腹部最宽的横带上绘人物、车马,以表现送葬行列、战斗场面等为主。该文化铁器已很完善,有斧、钻、锯、锄等工具和刀、剑、矛等武器。青铜器主要有用于装饰的别针。商业已较发达。该文化中心之一的雅典,受移民破坏最轻,又较早恢复了海外联系,与小亚细亚、塞浦路斯和爱琴海各岛接触频繁,铁器生产和快轮制陶技术都达到较高水平。
  
  该文化的遗迹主要是墓葬,流行火葬,但土葬仍未绝迹,一般是单人墓穴。在原始几何陶时期,陪葬品只有陶器和少量铁制用具、饰物;到了几何陶时期,始有金、银工艺品。贵族墓葬日渐豪华,在雅典古市场遗址发现的1座贵族妇女火葬墓,随葬珍贵饰物和陶器达80件以上,并有一谷仓模型。到几何陶文化后期,阶级分化日益加剧,进入奴隶制城邦的形成时期。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条