说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 动尺
1)  moving length
动尺
1.
This paper deduces the formula about the vision image of moving length,and then plots the vision image with MATLAB.
文章推导了"动尺"的视觉成象公式,并利用计算机作图,给出了可视化的"视觉形象"结果。
2)  dimension driven
尺寸驱动
1.
In order to obtain the solution for motion simulation and kinematic analysis of a parallel machine tool without the construction of mathematical model,a method of using assembly constraint and dimension driven function of CAD software was presented.
为了不建立数学模型完成并联机床机构的运动仿真和运动学分析,提出综合利用CAD软件所具有的装配约束和尺寸驱动功能实现运动仿真和运动学分析的方法。
2.
In order to obtain the solution for mapping NC code of a parallel machine tool from virtual axis space to real axis space without the construction of mathematical model, a method of using assembly constraint and dimension driven function of CAD software was presented.
为了有助于并联机床数控系统和仿真系统的开发 ,克服建立数学模型实现机床数控代码虚实映射计算的缺点 ,文章提出了综合利用CAD软件的装配约束和尺寸驱动功能来实现虚实映射的方法。
3.
By using the constraint and dimension driven concept in CAD software, some type of simulation for planar mechanisms is created.
提出用 CAD约束和尺寸驱动技术分析平面机构的运动 。
3)  dimension drive
尺寸驱动
1.
It narrates two ways of developing plat for SolidWorks,using VB to make parametric design——dimension drive method and program drive method.
介绍了SolidWorks软件的优点;叙述了以SolidWorks为开发平台,应用VB进行参数化设计的两种方法——尺寸驱动法和程序驱动法。
2.
Based on relationship and principle of dimension drive,using CAXA entity design to establish the reusable parametric intellectual pixels.
基于关联和尺寸驱动原理,使用CAXA实体设计,建立可重用的参数化智能图素,调用CAXA实体设计的二次开发函数以及C++标准模板库,通过参数名建立了不同特征尺寸之间的映射关系,以此来驱动相应的尺寸值,在CAXA实体设计上成功实现了自动装配设计功能,并给出应用实例原型。
3.
In this paper,we use modularization,relation,dimension drive and so on technologies,through CAXA Solid Design creating reuseable parameter parts and calling it s second-development interfaces,successfully realize no-constrain smart assembly design function on CAXA Solid Design.
论文基于模块化、关联、尺寸驱动等技术,通过CAXA实体设计建立可重用的参数化模块并调用其二次开发接口,在CAXA实体设计上成功实现了无约束方式的自动装配设计功能,并给出应用的实例原型。
4)  automatic cutting length
自动定尺
1.
This article, in view of problems existing in horizontal cutting machine, expounds the design and applicable result for the automatic cutting length control system.
本文针对横剪机组现行设备存在的问题,论述了自动定尺控制系统的设计及使用效果。
5)  automatic scale ruler
自动检尺
6)  Ulnar artery
尺动脉
1.
Applied anatomy of ulnar mesio-forearm flap pedicled with intermuscular branch of ulnar artery;
尺动脉近中段肌间隙穿支皮瓣的应用解剖
2.
Report on 27 cases of advanced breast cancer treated with catheterization chemotherapy through ulnar artery;
经尺动脉介入化疗治疗局部晚期乳腺癌27例临床分析
3.
Skin defect repaired by flap of suprawrist cutaneous branch of ulnar artery;
尺动脉腕上支皮瓣修复手部皮肤缺损
补充资料:千尺幢与百尺峡

游人过“回心石”后,即是华山第一险道——千尺幢和百尺峡,千尺幢往上看为一线天,往下望如深井,它形如裂隙,四壁直立,凿石为梯,游人经此,如同穿行井中,上有青天召唤,下有阴风催促,到达幢口攀出井外,顿有超尘脱俗之感。 在山崖极陡处开出的一条小路,共370多磴石级,石级的宽度只能容纳一个人上下,两旁挂着铁索,人们手攀铁索,一步步向上登,往上看,只见一线天开;往下看,就像站在深井上。千尺幢的顶端,就像井口一样。这里的崖壁上刻有“太华咽喉”、“气吞东瀛”的字样。其形势真像咽喉一样的险要。当小心翼翼的游人,手脚并用地爬上千尺幢,再往前走,还有一处险路──百尺峡。出峡,过仙人桥 ,前面又是一段险路“老君犁沟”,传说是太上老君牵来自己的青牛,在这个陡壁处犁出的一条小路。走完这段有500多个石级的“老君犁沟”,就登上了海拔1500多米的北峰。这里四面悬崖绝壁,恰如一座平台,因而又叫云台峰。 过千尺幢,马上就是百尺峡,虽没有千尺幢那么长,仅46米,石阶91级,但仍是华山天险之一。这里势危坡陡,石壁峭立,通道狭窄,且有悬石,摇摇欲坠。游人至此都心惊胆颤。明顾端木有诗状其险曰:“幢去峡复来,天险不可瞬。虽云百尺峡,一尺一千仞。” 千尺幢、百尺峡的台阶都是从明末清初开始凿的,民国时几经加固,解放后又多次修整。一九八五年又凿为复道,游人上下各行其道。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条