1) ultrasonic disruption rate
超声击破率
1.
The ultrasonic disruption rate was 3%-4.
结果表明:超声波处理污泥的时间为50~90 s时,消耗能量相对少;超声击破率在3%~4。
2) ultrasonic disintegration
超声破解
1.
Effect of characteristics of waste activated sludge and experimental conditions on ultrasonic disintegration;
超声破解污泥影响因素分析
2.
This paper focuses on the pretreatment of sewage sludge by ultrasonic disintegration and its anaerobic digestibility.
针对超声破解污泥的可行性进行了实验研究,重点考察了超声频率、比能耗、作用时间等因素对破解效应的影响,探讨了破解污泥的厌氧消化性能。
3.
The ultrasonic disintegration of excess sludge from municipal WWTP was conducted by ultrasound with the frequency of 40 kHz and the acoustic energy density of 0.
6W/mL的超声波对城市污水处理厂的剩余污泥进行超声破解,研究破解效应对污泥两相厌氧消化工艺去除有机物的效果、生物气产量和产气率的影响。
3) ultrasonication
[,ʌltrə,sɔni'keiʃən]
超声破碎
1.
The extraction of an acid urease from enterobacteria was studied by the methods of ultrasonication and ethanol fractional precipitation.
采用超声破碎和乙醇分级沉淀的方法,对肠杆菌所产酸性脲酶的提取进行了研究,超声破碎最佳条件为:缓冲液pH6。
4) ultrasonic demulsify
超声破乳
5) ultrasonic impact treatment
超声冲击
1.
Effect of ultrasonic impact treatment on residual stress of welded structure;
超声冲击对焊接结构残余应力的影响
2.
Analysis of strengthening mechanism of ultrasonic impact treatment of 2A12 aluminum alloy weld joint;
2A12铝合金焊接接头超声冲击强化机理分析
3.
Specimens of 22SiMn2TiB armor plate are treated by ultrasonic impact treatment(UIT).
采用超声冲击处理工艺对22SiMn2TiB装甲钢试样进行了表面冲击强化,采用四点弯曲加载装置将处理和未处理的试样在3。
6) fatigue strength
超声捶击
1.
Ultrasonic peening improves the fatigue strength of welded joints in a ultra-fine grained steel;
超声捶击提高超细晶粒钢焊接接头的疲劳性能
补充资料：电导率(见电阻率)
电导率(见电阻率)
conductivity
d!日nd日O}已电导率(eonduetivity)见电阻率。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条