1) Ti-loaded amount
载钛量
1.
Effects of two MgCl2 TiCl4 catalysts with different Ti-loaded amount on catalytic activity of 1,5-hexadiene cross-linking alkenes polymerization were studied.
研究了载钛量不同的两种MgCl2/TiCl4催化剂对1,5-己二烯交联烯烃催化活性的影响。
2) supported titanium
负载钛
1.
By mass polymerization,poly-1-butene(PBt) thermoplastic elastomer(TPE) was synthesized with 1-butene(Bt) in the presence of a catalytic system consisting of supported titanium(simplified as Ti) and triisobutyl-aluminum(simplified as Al).
以1-丁烯(B t)为原料,负载钛(简称Ti)-三异丁基铝(简称Al)为催化体系,用本体聚合法合成了聚1-丁烯(PBt)热塑性弹性体(TPE)。
3) activated carbon modified by titania film
载钛活性炭
1.
Electrosorption removal of Cr(Ⅵ) on activated carbon modified by titania film;
载钛活性炭电吸附去除Cr(Ⅵ)的研究
4) Polymer supported titanate
负载钛酸酯
1.
A polymer supported titanate was prepared by reacting titanium tetrachloride with polyvinyl alcohol in anhydrous alcohol and dimethyl sulfoxide solutions and then characterized using FTIR.
聚乙烯醇与四氯化钛在二甲基亚砜和无水乙醇的混合溶剂中反应,制得负载钛酸酯催化剂PVAC-1,用红外光谱对其进行了表征。
2.
A stable polymer supported titanate PVAC-1 was synthesized by reacting titanium tetrachloride with polyvinyl alcohol in dimethyl sulfoxide and ethyl alcohol solutions.
将聚乙烯醇与四氯化钛在二甲基亚砜和无水乙醇混合溶剂中进行反应,制得了负载钛酸酯催化剂PVAC-1,研究了在其催化作用下,合成邻苯二甲酸二异辛酯(DOP)的反应时间、催化剂用量、反应温度和重复使用次数与转化率的关系。
5) Polymer-supported titanate
负载钛酸酯
1.
A polymer-supported titanate(PVAC–1) was prepared by the reaction of titanium tetrachloride with polyvinyl alcohol,and was been characterized with FTIR.
聚乙烯醇与四氯化钛在二甲基亚砜和无水乙醇混合溶剂中反应,制得负载钛酸酯催化剂PVAC-1,用红外光谱对其分子结构进行了表征,用比色法测定了催化剂中的Ti含量。
2.
A polymer-supported titanate was prepared by the reaction of titanium tetrachloride with polyvinyl alcohol, characterized by FT-IR and used in the esterification for the synthesis of high boiling esters.
以聚乙烯醇与四氯化钛为原料,在二甲基亚砜和无水乙醇的混合溶剂中反应制备了负载钛酸酯催化剂PVAC-1,用红外光谱对其分子结构进行了表征,并用比色法测定了催化剂中的钛含量。
6) Ti content
钛含量
1.
Effects of Ti content on austenite coarsening temperature in AH36 steel were studied with Gleeble 1500 thermal simulator.
结果表明 :钛含量增加 ,钢的粗化温度提高 ,该钢合理的加热温度范围为12 0 0～ 12 5 0℃。
2.
Effects of chemical composition and rolling schedule on mechanical properties of 10 Ti steel have been studied in order to optimize Ti content and stabilize mechanical properties by using mechanical test, phase-analysis, SEM and TEM etc.
为了节约钢中钛含量,稳定力学性能,本文采用力学性能;相分析;扫描电镜、透射电镜等试验,研究了成分、轧制工艺对10Ti钢力学性能的影响机制。
补充资料：5t钛还原蒸馏炉(遵义钛厂)
5t钛还原蒸馏炉(遵义钛厂)
5t钛还原蒸馏联合炉(遵义钛厂)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条