1) laboratory strength
室内强度
2) strength at room temperature
室温强度
1.
When solid solution temperature exceeds 1 100 ℃,the grade of grain size and the strength at room temperature decreases with the increasing of solid solution temperature.
试验结果表明,随固溶温度升高,晶间腐蚀敏感性下降,为抑制晶间腐蚀,固溶温度应≥1100℃;钢管固溶后应快速冷却,以避免840℃附近Cr23C6碳化物大量析出导致敏化;固溶温度超过1100℃,随固溶温度升高,晶粒度等级和室温强度逐渐下降。
3) Indoor temperature
室内温度
1.
The results indicate that the maximal indoor temperature difference between test hot-box(with PV-Trombe wall) and the reference hot-box(without PV-Trombe wall) can reach to 6 ℃,the maximal difference between the indoor temperature of test-hot box and the ambient can reach to 18 ℃.
试验结果表明:带有PV-Trombe墙的测试热箱的室内温度比不带该墙体的对比热箱高6℃,与环境的最大温差可达18℃;由于空气流道的冷却,光电池工作温度较低,日平均发电效率可达10。
2.
The control process of indoor temperature by thermostat and the important concepts concerned in the design are introduced.
介绍了温控器对室内温度的控制过程、设计中涉及的重要概念,分析了温控器的辅助控制功能及设计中应注意的问题。
4) indoor humidity
室内湿度
1.
Moisture absorption and desorption feature of inner building envelope influenced indoor humidity and humidity load.
本文以建筑围护结构内表面的吸放湿为工程背景，对多孔介质中的湿迁移进行了研究，并在此基础上研究了建筑围护结构内表面吸放湿对室内湿度和湿负荷的影响。
5) room temperature
室内温度
1.
In order to meet need of the Energy Saving Department to measure and control room temperature in public building,a measuring and controlling system have been developed which can transmit the data of room temperature in every public building in a city.
公共建筑室内温度监测系统主要用于节能监管部门对公共建筑物室内温度的监管,通过该系统可以远程监测被监管对象的室内温度,将分布在城市各地方监管对象的温度数据自动采集并直接传输给节能管理部门。
6) repeated direct shear test
室内土工试验反复直剪强度试验
补充资料：表光合强度(见光合强度)
表光合强度(见光合强度)
forecast of sowing or transplanting time
b iaoguanghe qiangdu表光合强度见光合强度
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条