1)  numerical model of tidal bore
涌潮数值模型
2)  tidal bore
涌潮
1.
The design and construction of drilling platform of one bridge under strong tidal bore condition;
某大桥在强涌潮条件下的钻孔平台设计与施工
2.
Drilling cast-in-place pile construction supervision under strong tidal bore;
强涌潮下钻孔灌注桩施工监理
3.
Radial basis function network based tidal bore model and its application to Qiantang estuary;
基于径向基函数网络的钱塘江涌潮模型及其应用
3)  Tide
涌潮
1.
Research on One-dimension Numerical Simulation in Tide Flow Computation;
长江口北支涌潮的一维数值模拟
2.
Through model tests of a sloping soil dyke in a tidal flume, the stability of the concrete face plate under the action of tide is analyzed.
通过潮浪水槽中的斜坡式土堤模型试验 ,分析了涌潮作用下混凝土护面板的稳定性 。
3.
The full description of the formation, development and disappear of Qiantangjiangtide by numerical method is presented in this paper in details.
利用数值模拟的方法对钱塘江涌潮从杭州湾口开始形成、发展直至消失的全过程进行了深入全面的描写。
4)  bore
涌潮
1.
Dynamic response of pile-groins under the action of bore load;
涌潮荷载下桩式丁坝的动力响应
2.
The mid-scale equations of bores are deduced, and used to analyze the properties of bores and hy-draulic jumps.
推导了涌潮中尺度方程,并利用此方程,分析水跃和涌潮的性质。
3.
Histories of bores in the Qiantang Estuary,are modelled by using a twodimensional finite-volume,Osher scheme,and a discontinuity-fitting method.
应用二维有限体积法、Osher格式及间断拟合法,计算了钱塘江河口涌潮产生、发展到消亡的全过程。
5)  tide bore
涌潮
1.
The hydrological,geographical and geological conditions along the Qiantang estuary are very complicated, especially the character of the strong tide bore is an outstanding difference from the ordinary tide and flood.
钱塘江河口沿线的水文、地形、地质条件十分复杂,强涌潮的存在及其完全不同于洪、潮水的特性,恶化了施工条件,增加了海塘建设的复杂性和难度。
2.
In the method, the factors, such as the tide bore variations, swift current at tide ebb and flow, severe changes of muddy riverbed, and details of design and fabrication of the steel cofferdams are considered.
介绍国内某大跨径桥梁深水大体积承台围堰的施工方法,该钢围堰的施工考虑了涌潮变化、涨落潮流速大、淤泥质地状况的河床剧烈变化,以及围堰设计、制作安装。
3.
According to 1991 s statistics, about 184 events of tide bore occurred at the Lunqian Tidal Sta-tion.
根据1991年观测资料,仑前潮位站出现涌潮184次,涌潮次数多少与江道地形变迁及上游下泄流量大小有关。
6)  tidal bore height
涌潮高度
1.
Experimental study on influence of building bridge to tidal bore height in Qiantang River;
建桥对钱塘江涌潮高度影响的试验研究
2.
The result is that the bore acting force of the vertical square cylinders is related with the tidal bore height and the length of square cylinders.
通过涌潮水槽模型实验对垂直方柱正向涌潮作用力进行初探,得到了垂直方桩正向涌潮作用力与方桩边长、涌潮高度的经验公式。
3.
Based on the analyzed results between the tidal bore height and tidal lower level at the outlet of Jinghang Great Canal crossing the Qiantang River,tidal bore pressure and its distribution at the gate of the ship lock have been found through tidal bore flume experiment.
分析了二通道钱塘江出口处水域设计条件下涌潮高度与潮差、低潮位的关系,采用低潮位下50 a一遇的涌潮高度作为船闸闸门涌潮作用力试验的边界条件,得到船闸闸门所受的涌潮作用力和分布特征,涌潮对船闸闸门的最大作用力发生在低潮位附近,引航道喇叭形的出口将会加大涌潮对闸门的作用力。
参考词条
补充资料:AutoCad 教你绘制三爪卡盘模型,借用四视图来建模型
小弟写教程纯粹表达的是建模思路,供初学者参考.任何物体的建摸都需要思路,只有思路多,模型也就水到渠成.ok废话就不说了.建议使用1024X768分辨率

开始
先看下最终效果




第一步,如图所示将窗口分为四个视图




第二步,依次选择每个窗口,在分别输入各自己的视图




第三步,建立ucs重新建立世界坐标体系,捕捉三点来确定各自的ucs如图




第四步,初步大致建立基本模型.可以在主视图建立两个不同的圆,在用ext拉升,在用差集运算.如图:




第五步:关键一步,在此的我思路是.先画出卡爪的基本投影,在把他进行面域,在进行拉升高度分别是10,20,30曾t形状.如图:




第六步:画出螺栓的初步形状.如图




第七步:利用ext拉升圆,在拉升内六边形.注意拉升六边行时方向与拉升圆的方向是相反的.
之后在利用差集运算





第八步:将所得内螺栓模型分别复制到卡爪上,在利用三个视图调到与卡爪的中心对称.效果如图红色的是螺栓,最后是差集




第九步:阵列




第10步.模型就完成了




来一张利用矢量处理的图片


说明:补充资料仅用于学习参考,请勿用于其它任何用途。