1) Microspreading method
微铺展
2) spreading
[英][spred] [美][sprɛd]
铺展
1.
Liquid spreading and microstructure of Ti/Cu eutectic reaction;
Ti/Cu共晶反应液相铺展及组织
2.
Experimental investigation on spreading of droplets with evaporation and nucleation;
核化沸腾液滴的铺展实验观察
3.
Numerical Analysis of Fluid Flow and Velocity Field during Liquid Filler Droplet Spreading Behavior in Arc Brazing;
电弧钎焊钎料液滴铺展过程及其流场、速度场数值模拟和分析
3) spread
[英][spred] [美][sprɛd]
铺展
1.
In order to make it to be a good evaporating inhibitor, the spreading of it on the gasoline surface is necessary.
用氟表面活性剂为主要成分配制了一种汽油蒸发抑制剂 ,为使它能发挥抑制蒸发作用 ,必须使它在汽油等易挥发有机液体表面上铺展。
2.
The influence of rapid-solidifying on melt and spread characteristic of Sn2.
7Cu钎料合金薄带,通过DSC检测和铺展试验研究了快速凝固对Sn2。
3.
Based on VOF,a two-dimensional computational dynamic model is adapted to study the spread characteristics of water droplet impinging on inclined surface with different wetting properties.
采用基于volume of fluid(VOF)方法的计算流体力学二维模型,在考虑表面张力及壁面黏附的情况下,研究水滴在撞击浸润性不同的倾斜表面的铺展过程。
4) Outgrowth
[英]['aʊtɡrəʊθ] [美]['aut'groθ]
铺展
1.
The Stady of Effect of Interleukin-8 on Mouse Blastocyst Attachment and Outgrowth;
体外研究白细胞介素-8在小鼠胚泡粘附和铺展中的作用
2.
Methods: Mouse morulas were co-cultured with human decidual cells, then the development, attachment, and outgrowth of mouse embryos were observed by adding estrogen alone, progestogen alone, or estrogen plus progestogen to co-culture in vitro, and the experiment was divided into 4 groups.
方法 :在小鼠桑椹胚与人蜕膜细胞共培养体系中分别加入雌激素 (E2 组 )、孕激素 (P组 )、雌激素和孕激素 (E2 +P4 组 ) ,观察各组胚卵发育以及胚泡粘附和铺展情况。
3.
Methods: The blastocysts were cultured in the plates of FN-coated or co-cultured with human decidual cells, then we observed the influences on the attachment and outgrowth of mouse blastocysts.
方法 :在 FN包被组和共培养组分别移入胚泡观察并统计粘附率和铺展率。
5) ink spreading
油墨铺展
1.
Through analyzing effective dot area coverage and spectral prediction model with ink spreading in all superposition conditions,the influence of physical dot gain on Yule-Nielsen equation was studied.
介绍了Yule-Nielsen修正光谱Neugebauer方程的色彩预测模型,通过分析有效网点面积率、油墨铺展在不同叠印条件下,光谱反射率的预测模型,说明了物理网点扩大对方程的影响,然后又通过分析纸张的点传递函数PSF和概率模型,指出了光学网点扩大对方程的影响,更优化了模型,最后对Yule-Nielsen方程参数n值,具体做了解释并用迭代法求得最佳的n值。
2.
The fractal theory and fractal dimension were introduced to simulate ink spreading.
探讨了墨滴与纸面接触后发生的相互作用:铺展和渗透,分析了相互作用的机理;并根据Kubelka-Munk理论提出了能够确定渗透之后的光学参数的渗透模型;以及使用分形理论对油墨铺展进行模拟,能够精确确定网点面积;对喷墨印刷中其它分形应用作了初步地探讨,提出可以建立纸张涂层表面的粗糙度与墨水的光学性质和铺展性能的关联函数,进而可以分析不同印品的质量。
3.
The emphases in this thesis are the last two factors, especially the interactive between inks and substrates including ink penetration and ink spreading.
本文主要研究的是后两种,描述并分析油墨与纸张接触后发生的相互作用:油墨渗透和油墨铺展。
6) spreadability
铺展性能
1.
Effects of Ce on spreadability of Sn-Cu-Ni lead-free solder and mechanical properties of soldered joints;
稀土元素Ce对Sn-Cu-Ni无铅钎料铺展性能及焊点力学性能的影响
2.
Effects of Ce on physical properties and spreadability of Sn-Cu-Ni solder;
稀土Ce对Sn-Cu-Ni钎料物理性能和铺展性能的影响
3.
Effect of Ag and Ni on melting temperature and spreadability of Sn-SbCu solder alloy
Ag和Ni元素对Sn-Sb-Cu无铅钎料熔化温度和铺展性能的影响
补充资料：铺展润湿
分子式：
CAS号：
性质：液体和固体表面接触后在表面上展开，原来的固气界面被固液和液气界面取代的过程。若以vSL,vSV,vLV分别表示单位面积固液、固气、液气界面的界面自由能，则液体在固体表面上展开单位面积体系自由能的变化为：△G=vSL+vLV-vSV。常以铺展系数S（也称铺展功work of spreading）表征铺展过程进行的可能性：S=-△G= vSV-vSL -vLV。显然，△G≤0，即S≥0液体可在固体表面自动展开。
CAS号：
性质：液体和固体表面接触后在表面上展开，原来的固气界面被固液和液气界面取代的过程。若以vSL,vSV,vLV分别表示单位面积固液、固气、液气界面的界面自由能，则液体在固体表面上展开单位面积体系自由能的变化为：△G=vSL+vLV-vSV。常以铺展系数S（也称铺展功work of spreading）表征铺展过程进行的可能性：S=-△G= vSV-vSL -vLV。显然，△G≤0，即S≥0液体可在固体表面自动展开。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条