说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> POM晶体
1)  POM crystal
POM晶体
2)  POM [英][pɔm]  [美][pɑm]
POM库
1.
Analysis and Application of Extended Function of Modules Kept on POM Repository;
POM库模块扩展功能剖析与应用研究
3)  POM Plastics
POM塑料
1.
Approach to Injection Molding Technology of Typical POM Plastics Product;
POM塑料典型制品注塑工艺探讨
2.
The properties of the POM plastics and their influences to the moulding technology are anaˉlyzed.
分析了POM塑料的特性及其对注射工艺的影响 ,介绍了摇臂注射模主要零部件的尺寸计算方法、注射模结构及工作过程 ,模具结构设计精巧 ,操作方便 ,达到了塑件的尺寸精度要求。
4)  POM model
POM模型
1.
GIS based POM model and its application in the Bohai Sea simulation
基于GIS的POM模型及其在渤海潮流模拟中的应用
2.
The article establishes a mathematic model-3D heat transfer model based on POM model for simulating the impact of heated discharge.
本文在三维POM模型的基础上建立了一个用于预测电厂温排水对受纳水体水温分布影响情况的三维热输运数学模型。
3.
This study is leaded by POM model, based on“3D ocean non-stationary baroclinic model”, which is proposed by Russian scientist and developed by considering sea ice in the model.
该问题的解决以POM模型为先导,以俄罗斯海洋学家的“海洋三维非定常斜压模型”为基础,同时加入作者对该模型海冰部分的补充。
5)  Ekonol/G/MoS_2/POM
Ekonol/G/MoS2/POM
1.
Ekonol/G/MoS_2/POM composite was prepared by the torque rheometer mixing and compression molding.
用转矩流变仪共混模压成型方法制备了Ekonol/G/MoS2/POM复合材料,对复合材料的力学性能(含拉伸强度、弯曲强度、冲击强度和压缩强度)进行了测试,并对复合材料的承载能力进行了研究。
6)  POM [英][pɔm]  [美][pɑm]
POM模式
1.
3-D numerical simulation of tidal flow based on POM model
基于POM模式的感潮河段三维水动力模拟
2.
In this paper, Princeton Ocean Model (POM) is used to simulate the tide and tidal current in the sea area near the Zhuanghe power plant in the northern Yellow Sea.
基于POM模式,本文应用了考虑了四个主要分潮(M_2,S_2,K_1,O_1)的三维数值模式,对北黄海近岸的庄河电厂附近海域进行了数值模拟潮汐潮流的三维数值模拟。
3.
In terms of the present investigation on this topic, three-dimensional storm surge inundation model with dynamic boundary condition is built upon POM.
本文的计算建立在POM模式基础上,采用两重网格嵌套的方法,第一套网格对整个渤海海域进行固定边界风暴潮的数值模拟,第二套网格对天津近岸海域进行可变边界模拟。
补充资料:晶体管-晶体管逻辑电路
晶体管-晶体管逻辑电路
transistor-transistor logic
    集成电路输入级和输出级全采用晶体管组成的单元门电路。简称TTL电路。它是将二极管-晶体管逻辑电路(DTL)中的二极管,改为使用多发射极晶体管而构成。TTL电路于1962年研制成功,基本门电路的结构和元件参数,经历了3次大的改进。同DTL电路相比,TTL电路速度显著提高,功耗大为降低。仅第一代TTL电路产品,就使开关速度比DTL电路提高5~10倍。采用肖特基二极管的第三代TTL电路,开关时间可缩短到3~5纳秒。绝大部分双极型集成电路,都是TTL电路产品。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条