说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 监控关键点
1)  monitor key point
监控关键点
2)  Key monitoring point
关键监控点
3)  critical control point
关键控制点
1.
On critical control points in yoghurt production and factors affecting yoghurt quality;
酸奶生产过程中的关键控制点及影响酸奶品质的因素
2.
On the bacteriological analysis and Critical Control Points in the process of manufacture for iced yellow croaker (Larimichthys crocea);
冰鲜大黄鱼加工过程中的细菌学分析及关键控制点
3.
Determination of critical control points and control limit in meat-product processing;
肉制品加工中关键控制点及控制限值的确定
4)  key control point
关键控制点
1.
Evaluation of the key control point in preparing process and preparing effect for preparing frozen red blood cells with ACP 215
全自动细胞处理系统制备冰冻红细胞的关键控制点及效果评价
2.
The application of HACCP quality control system in the production of crisp sausage converse the following fields:production hazard analysis,key control points determination,HACCP control table formulation,records and assessment of HACCP system files etc.
HACCP质量控制体系在脆皮肠生产中的应用包括:生产危害分析、确定关键控制点、制定HACCP系统档案记录及评估等。
5)  Key control points
关键控制点
1.
These factors are used as key control points and running statue is authenticated with the factors.
目的探讨危害分析关键控制点(HACCP)在采供血过程中的应用。
2.
From construction quality assurance system,related elements,key control points and other aspects measures are discussed to increase the the assurance coefficient of construction quality in order to increase construction quality and ensure engineering quality as well as the competitive power for enterprises.
从施工质量保证体系、质量相关要素、关键控制点管理方面,探讨了如何提高施工质量保障系数,以有效提高施工质量,从而保证建设工程的质量,同时达到提高企业竞争力的目的。
3.
The key control points in the production procedure are also emphasized in the end of the article, for example, anti-static precaution and the protection of special comp.
设计了网络计算机的生产工艺 ,包括生产工艺流程 ,并逐工序介绍生产过程中的质量控制点 ,在文章末尾重点强调生产过程中的关键控制点 ,例如需要防静电及特殊器件的防护等。
6)  CCPs
关键控制点
1.
Study on the Processing Technique and CCPs of Cured Mutton;
腊羊肉加工工艺及关键控制点的研究
2.
Study on the processing technique and CCPs of cured beef;
腊牛肉加工工艺及关键控制点的研究
3.
Hazard of each processing procedure is analyzed first,then the critical control points(CCPs) as well as the corresponding critical limits are determined,finally a HACCP plan is developed.
通过对生产过程各工序进行危害分析,确定了关键控制点,并提出了相应的关键限值,最终形成了HACCP计划。
补充资料:闭式单点、双点压力机
代码:00413
设备名称:闭式单点、双点压力机
型号规格:公称力≥800kN
计量单位:台
主要参数内容
国际先进国内先进国内一般国内落后评定方法及说明
(一)加工精度
    参照GB10924-89、GB10933-89、JB5200-91
1、滑块下平面对工作台上平面的平行度(mm)
30%精度储备20%精度储备达到规定值大于规定值 
0.02+0.10/100×滑块下平面的被测长度
     
2、滑块行程对工作台上平面的垂直度
30%精度储备20%精度储备达到规定值大于规定值 
0.05+0.02/100×滑块行程长度
     
(二)结构性能
     
1、离合器、制动器接通率,当滑块行程次数≤16次/分时为70%,≤25次/分时为60%,≤45次/分时为50%
大于规定值10%大于规定值达到规定值达不到规定值 
2、液压超负荷保险装置、微调装置、吨位指示器
全部具有全部具有部分具有没有 
(三)噪声dB(A)
     
1、公称力≤400kN
≤85≤87≤88>88 
2、公称力>400kN
≤87≤88≤90>90 
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条