说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 联合锚固技术
1)  combined anchorage technique
联合锚固技术
2)  anchoring technique
锚固技术
1.
The prestressed geotechnical anchoring technique is one of supports used in deep foundation pits, underground buildings, tunnels, road slopes, dam foundation, bridges and so on.
预应力岩土锚固技术是深基坑、地下工程、隧道、道路边坡、坝基、桥梁等工程中重要的支护手段之一 ,全面剖析了这项技术在理论研究、应用领域、规模、标准化建设、锚固材料及施工机具等突破性进展 ,根据我国基础施工现状 ,对锚杆的设计、锚固参数合理选择、锚杆的腐蚀与防护进行了分析 ,从 8个方面指出了预测应力岩土锚固技术的研究方向。
2.
Looking back the development of the geotechnical anchoring technique applications,the article talks about the anchor ann reinforced rationale and research progress of geotechnical anchoring technique,and points out the fact that this technique should be deeply studied for further improving it.
回顾了岩土锚固工程技术应用发展概况,叙述了锚杆的加固机理及岩土锚固技术研究进展,进而提出了为进一步提高岩土锚固工程技术水平应深入进行研究的课题。
3)  anchoring technology
锚固技术
1.
In this paper the present situation of development and application of anchoring technology,mechanism for anchoring technology both at home and abroad were introduced.
本文简要介绍了目前锚固技术的发展和应用以及国内锚固机理试验研究 ,最后指出了锚固技术在岩土工程中应用还需要开展的理论研究工作。
4)  anchorage technique
锚固技术
1.
The anchorage technique used for strengthening the retrogressive traction area at the rear edge of Gushubao slipblock and the deformation monitoring for this slipblock are introduced.
主要介绍在水布垭古树包滑坡体治理中利用岩土锚固技术对后缘牵引溯源区进行加固处理的施工技术及滑坡变形监
2.
The rebar planting anchorage technique and its imperfections are introduced;some suggestions are also proposed accordingly,integrating its applications in architectural field.
结合植筋锚固技术在建筑领域中的应用 ,介绍了这一新技术在应用中的不完善之处 ,相应地提出了一些改进建
5)  anchor technique
锚固技术
1.
The rear anchorage of the 1 200 kN cable crane used for construction of Yunnan Xiaowan Bridge is set separately in the cliffs of both banks,using a kind of anchor technique of prestressed cables .
用于云南小湾大桥施工的 12 0 0kN缆索吊机后锚碇分别设置在两岸峭壁上 ,采用预应力锚索锚固技术。
6)  combined consolidation technology
联合加固技术
1.
The combined consolidation technology including low-energy dynamic consolidation and dewatering has integrated two construction technical characteristics, the dynamic consolidation and the dewatering.
低能强夯与真空降水联合加固技术综合了强夯与真空降水两种施工技术的特点。
补充资料:RP技术和基于RP技术的RT技术

摘要:介绍了快速成形技术的原理和几种典型成形方法。同时,还介绍了基于快速成形技术的快速模具技术在模具制造业中的应用,以及快速成形技术的现状和发展趋势。
    关键词:快速成形;快速模具;直接快速制模;间接快速制模。


引言
    快速成形(Rapid Prototyping , RP.)技术,也叫快速原型技术,20世纪80年代后期起源于美国。该技术是一种集计算机辅助设计、机械、数控、检测、激光技术和材料学等为一体的先进制造技术。传统的制造方法是基于材料去除的概念,而 RP 技术突破了这种工艺方法,它是一种“使材料生长”的制造过程,是一种全新的制造技术,所以被誉为是近20年来制造技术领域的一项重大突破。


RP技术
    1、原理
    RP 技术是基于离散/堆积的原理。在计算机的控制下快速成型机的成形头选择性地固化一层层的液体材料(或选择性的切割一层层的纸、烧结一层层的粉末材料、喷涂一层层的热熔性材料等),形成各个截面轮廓并逐步顺序叠加成三维工件实体。其工艺步骤为:
    (1)切片  把三维CAD模型转化为快速原型系统能够接受的数据格式,运用切片软件将模型切成一系列指定厚度的薄片。
    (2)扫描  通过数控装置控制激光或其他作业装置,在当前工作层上扫描出切片的截面形状。
    (3)进给  把工作台沿着某一方向下降每次成形厚度那样一个距离。重复上一步骤和本步骤,直到工件完全成形。
    (4)后处理  根据不同应用场合的需要,分别对零件进行后固化、上漆、烧结、渗铜等处理。
    2、类型
    目前RP的方法有几十种,但商品化较好的主要有:光固化立体成形(Stereo Lithogra- phy Apparatus, SLA)、分层实体制造(Laminated Objected Manufacturing ,LOM)、选择性激光烧结(Selected Laser Sintering , SLS)、熔融沉积造型(Fused Deposition Modeling , FDM)、三维印刷(Three Dimensional Printing , TDP)等。另外,很有潜力的激光气相沉积(Laser Vapor Deposition , LVP)法正在试验之中。
    (1)SLA  SLA法是出现最早,技术最成熟和应用最广泛的RP 技术,由美国的3D Systems 公司推出。SLA法是用激光束按照截面轮廓的形状,沿液态光敏树脂的表面进行扫描来固化光敏树脂,从而成形工件。工件的表面质量较好,尺寸精度较高(相对于其他RP 方法),可确保工件的尺寸精度在0.1mm以内,但树脂会因吸收空气中的水分而收缩、弯曲、卷翘,产生应力,适合成形中小型工件。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条