1) Gonggong
共工
1.
This paper claims that "Gun s blocking up the flood" and "Gonggong s re - energizing waters" are in fact different legends developed from the same historical fact.
论文认为,“鲧堙洪水”与“共工振水”实际上是同一史实分化出的不同传说。
2.
The sun tree Fairy fale in Qu Yuan s work refred to the east and northwest,and it hadn t mentioned Ruo shui s sun tree;The time god in the work was taken from DongYi nationality,and it didn t come from the previous Chu tree;GongGong was a hero of early harness water and land,but this period of history did come into Qu Yuan visual field.
屈原作品的太阳树神话 ,涉及到东方和西北 ,而没有提到若水的太阳树 ;作品中的时间神取自东夷族 ,而不是来自先楚谱系 ;共工早期是平治水土的英雄 ,但这段历史没有进入屈原的视域。
2) industrial symbiosis
工业共生
1.
Study on Network Complexity of Industrial Symbiosis System;
工业共生系统的网络复杂性研究
2.
Industrial Symbiosis Network Organization Stability Study of Ecological Industrial Park;
生态工业园工业共生网络稳定性研究
3.
Optimization of industrial symbiosis networks in arid areas:a case study on Shihezi City,Xingjiang
干旱区工业共生网络优化研究——以新疆石河子市为例
3) Industry Intergrowth
工业共生
1.
On the Development of Cyclic Economy in Mineral Areas Promoted by Industry Intergrowth;
以工业共生方式促进矿区循环经济的发展
2.
Based on the analysis that industry intergrowth is the effective way of the development of circulation economy in mine area,this paper systemically identifies and divides the main chain-net models of mine area industry intergrowth into four kinds:main leading,parallel,attaching and mixture form;summarizes their features,and takes cases' study.
在分析工业共生是矿区发展循环经济有效途径的基础上,系统地识别和划分了主导型工业共生、平等型工业共生、依附型工业共生和混合型工业共生4种矿区工业共生主要链网模式,总结了各自结构特点,并对煤炭矿区进行了实证研究。
3.
based on the analysis that industry intergrowth is the effective ways of development circulation economy for mine area,this paper systemically identifies and divides the main chain-net models of mine area industry intergrowth into four kinds,① main leading、②parallel、③attaching、④mixture form;summarizes their features,and takes case study.
本文在分析工业共生是矿区发展循环经济有效途径的基础上,系统地识别和划分了主导型工业共生、平等型工业共生、依附型工业共生和混合型工业共生4种矿区工业共生主要链网模式,总结了各自结构特点,并对煤炭矿区进行了实证研究。
4) blending procedure
共混工艺
1.
ABS/PBT blends compatibilized with styrene-maleic anhydride(SMA) was prepared in a corotating twin-screw extruder with different blending procedure.
以苯乙烯-马来酸酐共聚物(SMA)为增容剂,研究了共混工艺对ABS/PBT共混物聚集态结构和力学性能的影响。
2.
Acrylonitrile/butadiene/styrene copolymer(ABS)/nylon 6(PA6) blends compatibilized with styrene-maleic anhydride (SMAH) was prepared in a corotating twin-screw extruder with different blending procedure.
以(苯乙烯/马来酸酐)共聚物(SMAH)为增容剂,研究了共混工艺对(丙烯腈/丁二烯/苯乙烯)共聚物/尼龙6(ABS/PA6)共混物聚集态结构和力学性能的影响。
3.
PA6/ABS(acrylonitrile-butadiene-styrene) blends compatibilized with styrene-maleic anhydride (SMA) were prepared in a corotating twin-screw extruder with different blending procedures.
以苯乙烯-马来酸酐共聚物(SMA)为增容剂,研究了共混工艺对PA6/ABS共混物结构和力学性能的影响。
5) blending technology
共混工艺
1.
Influence of Blending Technology on Aggregation Structure and Property of ABS/PA6 Blend;
共混工艺对ABS／PA6共混物聚集态结构及性能的影响
2.
Effect of Blending Technology on Mechanical Properties of PP/PA6/Nano-meter SiO_2 Composite;
共混工艺对PP/PA6/纳米SiO_2复合材料力学性能的影响
3.
Influence of ingredient and blending technology on properties of HMWPVC/POM/NBR ternary blending elastomer;
共混工艺对HMWPVC/POM/NBR弹性体性能的影响
6) joint work
共同工作
1.
After analyzing the new architecture using glass and pointing out the insuffictent lateral stiffness of the dot point glazing structure,the authors puts forward the theory of the joint work of the steel support structure and glass panels,and the corresponding FEM analysis formulas.
介绍了常用的玻璃材料 ,采用断裂力学的方法研究了荷载的时间效应对玻璃材料强度的影响 ,总结了应用玻璃的新型结构 ,并针对点式玻璃幕结构侧向刚度不足的弱点 ,提出了支撑钢结构和玻璃面板共同工作的理论和相应的有限元分析公式 ,通过计算比较 ,得出了两者共同工作可提高结构侧向刚度两倍以上的结论 。
补充资料：共工
| 共工 中国古代神话中炎帝的后裔。相传是古代的水神。传说共工人面蛇身朱发。关于共工的神话传说很多，其中最著名的是共工与颛顼之战。《淮南子》记载：昔者共工与颛顼争为帝，怒而触不周之山，天柱折，地维绝，天倾西北，故日月星辰移焉；地不满东南，故水潦尘埃归焉。关于共工的传说还有禹逐共工，祝融与共工战等等。 |
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条