说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 聚酰胺酸酯
1)  poly(amic ester)
聚酰胺酸酯
1.
Synthesis of poly(amic ester)(PAE) by using 4,4 -(hexafluoroisopro-pylidene)-diphthalic anhydride(6FDA),pyromellitic dianhydride(PMDA),4,4 -oxydianiline(ODA) and hydroxyl ethyl acrylate(HEA) as monomers,and N-methyl-pyrrollidone(NMP) as solvent,was conducted in nitrogen atmosphere.
以4,4'-六氟亚异丙基-邻苯二甲酸酐(6FDA),均苯四酸二酐(PMDA),4,4'-二氨基二苯醚(ODA),丙烯酸羟乙酯(HEA)为单体,以N-甲基吡咯烷酮(NMP)为溶剂,氮气保护下合成了光敏聚酰胺酸酯(PAE)。
2)  polyesteramide [,pɔli,estə'ræmaid]
聚酯酰胺
1.
Synthesis and Degradation of Polyesteramide Based on L-Lactic acid and β-Alanine;
基于乳酸和β-丙氨酸的聚酯酰胺共聚物合成及降解
2.
A kind of ε-polyesteramide copolymer was synthesized by the condensation of ε-amidediol and adipic acid upon heating and characterized by means of IR, ~1H NMR and DSC.
以合成的酰胺二元醇和己二酸为原料合成聚酯酰胺(PEA),采用IR、1HNMR和DSC对其进行表征,同时,以PEA为改性剂对纳米掺锑二氧化锡(ATO)粉体进行表面改性,使其均匀分散于苯酚 四氯乙烷溶剂中。
3.
A new kind of polyesteramides (PEAs) copolymer based on ε-caprolactone and 6-Aminocaproic acid was synthesized by the melt polycondensation method.
用ε-己内酯和6-氨基己酸熔融聚合生成聚酯酰胺。
3)  poly(ester amide)s
聚酯-酰胺
1.
Study on Thermal Property and Hydrolysis of Aliphatic poly(ester amide)s;
脂肪族聚酯-酰胺混缩聚物热性能及水解降解性能
4)  polyester-amide
聚酯酰胺
1.
Resistance of polyester-amide reverse osmosis membrane to fouling and chlorine
聚酯酰胺反渗透膜的耐污染性和耐氯性
2.
The polyester-amide hot-melt adhesives were prepared by co-polycondesation with PET and dimer acid as primary raw materials.
研究了以涤纶树脂、二聚酸等为主要原料,通过共缩聚反应制备聚酯酰胺热熔胶的方法,探讨了 配比及反应条件等对热熔胶性能的影响。
3.
After they go through the exchange reaction of macromolecule chain,we obtain polyester-amide hot melt adhesive for textile.
研究了以聚酯胶和聚酰胺胶为原料在催化剂作用下加热共熔,通过大分子链交换反应制备织物用聚酯酰胺热熔胶的方法。
5)  polyesteramide [,pɔli,estə'ræmaid]
聚酰胺酯
1.
Synthesis and properties of aliphatic branched polyesteramide;
脂肪族支化聚酰胺酯的合成与性能
2.
Synthesis and characterization of biodegradable polyesteramides;
可生物降解脂肪族聚酰胺酯的合成与表征
3.
Application research progress of hyperbranched polyesteramide
超支化聚酰胺酯应用研究进展
6)  poly(amide-ester)
聚(酰-胺酯)
补充资料:甲基丙烯酸甲酯-丙烯酸乙酯-丙烯酸甲酯共聚物
分子式:
CAS号:

性质:甲基丙烯酸甲酯、丙烯酸乙酯、丙烯酸甲酯三元热塑性共聚物。在本体或悬浮聚合中,适量加入丙烯酸乙酯或丙烯酸甲酯或两者,可改进聚甲基丙烯酸甲酯的柔韧性和流动性。如甲基丙烯酸甲酯和少量丙烯酸酯(甲酯、乙酯)由悬浮聚合制得的模塑料,视丙烯酸酯的品种和加量不同,有的可作挤塑板用,有的可作PVC改性剂等。在溶液和乳液聚合中,甲基丙烯酸甲酯为“硬单体”,丙烯酸甲酯、丙烯酸乙酯为“软单体”,适当调节它们的比例,可制得成膜软硬度不同的液状树脂。适用于作涂料、漆料、织物和皮革处理剂等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条