2) single-lap joint
单搭接胶接接头
1.
Influences of adherent thickness,temperature and velocity on strength of adhesively-bonded single-lap joints
板厚、温度和速度对单搭接胶接接头强度的影响
3) weld-bonded single-lap joint
单搭胶焊接头
4) coaxial single lap bonded joint
同轴单搭接胶接接头
1.
Investigation on stress distribution in coaxial single lap bonded joint;
同轴单搭接胶接接头应力分布的探讨
5) single-lap joint
单搭接头
1.
The stress and stiffness models of a single-lap joint are developed based on the linear elasticity theory considering the adherend shear deformations.
应力模型中的正应力和剪应力与有限元解吻合得较好,证明理论模型正确,参数研究中确定了影响胶焊单搭接头应力分布特征的关键耦合参数。
2.
Shear experiments of three types of single-lap composite joints,processed respectively by using RTM,stitched RTM and adhesively bonded techniques,are carried out to investigate the influences of process on mechanical properties of composite single-lap joint and failure mechanism is discussed from experimental observation.
在常温和湿热高温的环境下,分别进行了三种不同的成型工艺(RTM、引入缝纫的RTM和胶接)制备的单搭接头的剪切强度实验,研究了成型工艺对单搭接头的剪切强度的影响,并根据实验现象分析了单搭接头的剪切破坏机理。
3.
Shearing experiments were carried out to investigate mechanical properties of composite single-lap joints,processed by using the RTM techniques,and failure mechanism was discussed from experimental observation.
在常温环境下,进行了RTM成型工艺制备的复合材料单搭接头的剪切强度实验,记录并处理了实验数据;根据实验现象分析了单搭接头的破坏机理;建立了RTM复合材料单搭接头的三维(3D)有限元模型,模拟了搭接头的拉伸剪切破坏过程,并预测了搭接头破坏位置与破坏载荷,预测结果与实验现象吻合良好。
6) single lap joint
单搭接接头
1.
Effect of preformed angle on the shear strength of adhesively bonded single lap joints;
预偏角对单搭接接头强度的影响
2.
Numerical analysis on stress distribution in single lap joint with a metal inlay
含镶嵌块单搭接接头应力分布的数值分析
3.
The effect of elastic modulus of adhesive on the str es s distribution in aluminium alloy single lap joint was investigated using elasti c-plastic finite element method(FEM).
运用弹塑性有限元法,研究了胶粘剂弹性模量对含间隙的铝合金单搭接接头上应力分布的影响。
补充资料：挂搭单
【挂搭单】
（杂名）同于挂单。
（杂名）同于挂单。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条