1) zinc-rich powder coating
富锌涂层
1.
The effects of zinc-rich powder coating and cathodic protection on the sensitivities to stress corrosion cracking(SCC) of X80 and 16Mn steels were investigated using dynamic slow strain rate test(SSRT) in weak acidic environment.
为加强对油气管线钢腐蚀失效机理的认识,采用动态慢应变速率拉伸试验(SSRT),研究了弱酸性环境中富锌涂层与阴极保护对16Mn和X80 2种不同强度级别管线钢应力腐蚀开裂(SCC)敏感性的影响,探讨了2种管线钢的SCC机理。
2) organic zinc-rich coatings
有机富锌涂层
3) sintered zinc rich coatings
烧结式富锌涂层
1.
The effect of chromic trioxide content in solutions on the properties of sintered zinc rich coatings was studied by employing zinc flakes and aluminum flakes as materials.
以片状锌粉和铝粉为原材料 ,研究了涂料中铬酐含量对烧结式富锌涂层性能的影响。
4) zinc-rich coatings
富锌涂料
1.
The paper introduced the characteristics of several zinc-rich coatings anti the method of zinc content measurement.
介绍了几种富锌涂料的特点及其锌含量的测定方法。
2.
This paper introduces new development trend of overseas zinc-rich coatings preparation with zinc flake instead of spherical zinc powder and discusses the anticorrosion mechanism of flake zinc-rich coatings film.
介绍了国外采用鳞片状锌粉取代球状锌粉研制富锌涂料发展的新趋势,对鳞片状锌基涂层抗蚀性能的机理进行了探讨,并从实际实验数据中得到了与理论分析相一致的结论,即鳞片状锌粉涂层在干膜含锌量降低的情况下,其抗蚀性能仍优于球状锌粉涂层,鳞片状富锌涂料是球状富锌涂料理想的换代产品。
3.
The formulation of high mole ratio potassium silicate zinc-rich coatings is given, which is compared to the similar products abroad in terms of its performance.
研究了不同硅溶胶、硅酸钾和烷氧基硅烷对高模数硅酸钾制备的影响 ;探讨了温度、时间和搅拌速度对高模数硅酸钾制备的影响 ;进行了高模数硅酸钾富锌涂料的配方实验 ,并与国外样品的性能进行了比较。
5) zinc-rich coating
富锌涂料
1.
Study on the curing mechanism of sodium silicate inorganic zinc-rich coating;
钠水玻璃富锌涂料固化机理的探讨
2.
The electrochemical behavior of the modified waterborne epoxy - polyurethane zinc - rich coatings with different amounts of zinc powder in 3 % NaCl solution was investigated using corrosion potential test and electrochemical impedance spectroscopy (EIS) , and compared with that of zinc-rich coating containing a small amount of aluminum powder and traditional epoxy zinc-rich coatings.
为制得环保且防腐蚀性能优异的富锌涂料,引入环氧树脂来改性水性聚氨酯,以水性环氧聚氨酯为基料制备富锌涂料,通过对其腐蚀电位和电化学阻抗谱(EIS)的测试分析,研究了添加不同含量锌粉的富锌涂层在3%NaCl溶液中的腐蚀电化学行为,并与添加少量铝粉的富锌涂料及传统富锌涂料进行了对比。
6) steel plate of rich-zinc organic coat
富锌有机涂层钢板
补充资料：钢板镀锌、彩涂装备生产线流程
连续热镀锌线
彩涂钢板生产线
开卷机→双切剪→连接机→边部压平机→入口活套→前处理→化学涂铺→化学烘干→初涂机→初烘炉→1号水淬→精涂机→精烘炉→ 2号水淬→废气焚烧装置→出口活套→分剪机→卷取机→称重→产品包装
工艺控制系统
剪切生产线
上料小车→单或双支撑开卷机→校平机→过桥→ 纠偏送料装置→纵剪机→废边收卷机→横剪机→皮带输送机→ 堆垛机→产品包装
彩涂钢板生产线
开卷机→双切剪→连接机→边部压平机→入口活套→前处理→化学涂铺→化学烘干→初涂机→初烘炉→1号水淬→精涂机→精烘炉→ 2号水淬→废气焚烧装置→出口活套→分剪机→卷取机→称重→产品包装
工艺控制系统
剪切生产线
上料小车→单或双支撑开卷机→校平机→过桥→ 纠偏送料装置→纵剪机→废边收卷机→横剪机→皮带输送机→ 堆垛机→产品包装
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条