1) jet fracturing
射流压裂
1.
Application of hydraulic perforation jet fracturing technology in Changqing Oilfield;
水力射孔射流压裂工艺在长庆油田的应用
2) perforation and fracturation
射孔压裂
1.
The effect of perforation and fracturation have derect ralation to the output of the oilwell.
射孔、压裂及地层压力恢复过程的压力数据,对研究油气层特征,分析射孔压裂的完井效果,制定合理的施工工艺,为射孔枪的系统设计提供实验依据等都有重要的现实意义。
3) jet splitting
射流分裂
1.
Discussion of jet splitting during electrospinning process;
静电纺丝射流分裂过程的探讨
2.
The high-speed camera,scanning electron microscope and universal tensile machine were used to examine the jet splittings,the morphology and the mechanical property of resultant mats.
在聚苯乙烯(PS)溶液中添加十二烷基苯磺酸钠(SDBS)表面活性剂改变射流分裂行为,从而改善了电纺毡的结构与性能。
4) jet breakup
射流断裂
1.
A m athem aticalm odelcocerning w ith thejet breakup in longitudinalvibration oflow frequency w as derived.
用振动喷射造粒的方法要获得粒度均匀的颗粒关键在于射流断裂能产生粒度均匀的液滴。
5) distributory hydrofracturing
分流压裂
6) limited entry fracturing
限流压裂
1.
Based on 3-dimensional hydraulic fracturing model and the similarities between fluid flow in limited entry fracturing process and electricity current flow in circulation circuit,a numerical model was developed to compute the injection reallocation rates in different layers.
基于三维水力裂缝几何模型,根据限流压裂设计中流体流动与循环电路中电流流动的相似性,建立一个计算限流压裂设计中各层注液量分配的数值模型。
2.
Single well zonal earth stress and rock mechanic parameters are calculated for limited entry fracturing in Well Bin670 and for determination of the extreme injection pressure in block Bin660-665.
滨670井、滨660-665区块进行了单井分层地应力及地层岩石力学参数分析计算,用于滨670井限流压裂设计以及滨660-665区块极限注水压力的确定,取得了理想的效果。
3.
In order to solve this problem,a research of limited entry fracturing technology for horizontal wells has been fulfilled,and a successful field experiment of fracturing and associate techniques was done in Well Niuping 10-12,in which 4 perforated intervals were stimulated in large scale,the initial flow rate of the well after fracturing was 7.
针对牛圈湖西山窑油藏低孔、低渗、低压油藏,直井单井产能低的特点,开展水平井限流压裂技术研究。
补充资料：稠化油压裂液
分子式：
CAS号：
性质：将稠化剂(常用脂肪酸皂)溶于油中(多用原油、汽油、煤油或柴油为基液)形成稠化油压裂液。所用的稠化剂分为油溶性活性剂和油溶性高分子两类。前者除脂肪酸单皂、双皂外还有磷酸酯盐等；后者有聚烯烃、聚二烯烃，如聚丁二烯、聚异丁烯、聚异戊二烯，还有α-烯烃聚合物、聚烷基苯乙烯、聚丙烯酸酯、聚羧酸乙烯酯等。
CAS号：
性质：将稠化剂(常用脂肪酸皂)溶于油中(多用原油、汽油、煤油或柴油为基液)形成稠化油压裂液。所用的稠化剂分为油溶性活性剂和油溶性高分子两类。前者除脂肪酸单皂、双皂外还有磷酸酯盐等；后者有聚烯烃、聚二烯烃，如聚丁二烯、聚异丁烯、聚异戊二烯，还有α-烯烃聚合物、聚烷基苯乙烯、聚丙烯酸酯、聚羧酸乙烯酯等。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条