说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 压缩响应
1)  compression response
压缩响应
1.
The final thickness of a product after the vacuum infusion process (VIP), which is equal to the fiber volume fraction, depends in part on the compression responses of the preform because one of the mold faces is flexible in VIP.
在VIP(Vacuum Infusion Process)工艺中,零件的最终厚度也即是零件的纤维体积含量因单面模具和柔性真空袋的使用而部分地取决于预成型体的压缩响应
2)  test response compaction
测试响应压缩
1.
Based on test stimulus and test response, the test compression techniques can be classified to two categories; test stimulus compression and test response compaction.
测试数据分为测试激励和测试响应2种,测试压缩也对应分为测试激励压缩和测试响应压缩2个方面。
2.
The test compression techniques can be classified to two categories, that is, test stimulus compression and test response compaction.
根据测试数据性质的不同,测试压缩可分为测试激励压缩和测试响应压缩两个方面。
3)  Test response compactor
测试响应压缩器
4)  contraction / elongation response
伸缩响应性
5)  compressibility influence
压缩性影响
6)  pressure response
压力响应
1.
Streamline numerical well-testing interpretation model and pressure response for partially perforated wells
部分射开井流线数值试井解释模型及压力响应
2.
The methods include pressure response algorithms for a random multiple deviated well system with random dip,random output changes and array modes and an algorithm of nonlinear programming for deriving well test parameters,which are appropriate for multiple solution characters of multiple deviated well system.
本文提出一套斜井多井系统中单井测试曲线的试井分析方法,其中包括任意倾斜角度、任意变化产量、任意排列形式的任意多口斜井的多井系统压力响应的算法和适合于斜井多井系统多解特征的求解试井参数的非线性规划算法。
3.
On the basis of the research of Ozkan,et al,a practical method for calculating the pressure response of deflecting wells is put forward,and its calculating efficiency is 10 times higher than that of the numerical integrati.
针对上下边界封闭或定压的水平方向无界的板状油藏中,斜井试井解释数值积分计算量大、实用性差的问题,在Ozkan等人的研究基础上,提出了一种实用的计算斜井压力响应的方法,计算效率提高一个数量级。
补充资料:电冰箱压缩机和空调器压缩机
摘要:     压缩机是制冷系统的心脏,它从吸气管吸入低温低压的制冷剂气体,通过电机运转带动活塞对其进行压缩后,向排气管排出高温高压的制冷剂气体,为制冷循环提供动力,从而实现压缩→冷凝→膨胀→蒸发(吸热)的制冷循环。压缩机一般由壳体、电动机、缸体、活塞、控制设备(启动器和热保护器)及冷却系统组成。启动器基本上有两种,即重锤式和PTC式。其中后者较为先进。冷却方式有油冷和自然冷却两种。 
       
文章内容: 
     1.概述 
      
     压缩机是制冷系统的心脏,它从吸气管吸入低温低压的制冷剂气体,通过电机运转带动活塞对其进行压缩后,向排气管排出高温高压的制冷剂气体,为制冷循环提供动力,从而实现压缩→冷凝→膨胀→蒸发(吸热)的制冷循环。压缩机一般由壳体、电动机、缸体、活塞、控制设备(启动器和热保护器)及冷却系统组成。启动器基本上有两种,即重锤式和PTC式。其中后者较为先进。冷却方式有油冷和自然冷却两种。 
      
     一般家用冰箱和空调器的压缩机是以单相交流电作为电源,它们的结构原理基本相同。冰箱压缩机功率较小,通常在250W以下。而空调器压缩机功率通常在230-900W之间。两者使用的致冷剂有所不同。 
      
     2.生产制造方法 
      
     压缩机是以流水线方式生产的。在机械加工车间(包括铸造)制造出缸体、活塞(转轴)、阀片、连杆、曲轴、端盖等零部件;在电机车间组装出转子、定子;在冲压车间制造出壳体等。然后在总装车间进行装配、焊接、清洗烘干,最后经检验合格包装出厂。大多数压缩机制造厂不生产启动器和热保护器,而是根据需要从市场采购。 
      
     3.种类 
      
     目前家用冰箱和空调器压缩机都是容积式,其中又可分为往复式和旋转式。往复式压缩机使用的是活塞、曲柄、连杆机构或活塞、曲柄、滑管机构,旋转式使用的是转轴曲轴机构。 
      
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条