说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 液体环氧减阻内涂层
1)  liquip epoxy reduce resistance internal lining
液体环氧减阻内涂层
2)  resistance-reducing internal coatings
内减阻涂层
1.
The basic principles of resistance-reducing internal coatings are briefly introduced.
分析了涂层缺陷形成的原因及对涂层减阻的影响,并探讨了相应的对策,总结了对内减阻涂层涂覆过程控制的重要意义。
3)  noise reduction paint
减阻涂层
4)  epoxy coating
环氧涂层
1.
Influence of graphite flake on the strength and water absorption of epoxy coating;
鳞片石墨对环氧涂层强度和吸水性能的影响
2.
Application of silane soakage and epoxy coating in Huanghai Bridge
硅烷浸渍和环氧涂层工艺在黄海大桥中的应用
3.
To improve the bonding strength between the titanium alloy substrate and epoxy coating filled with the absorbent Fe,TiO2 films with a certain thickness are prepared on the titanium substrate by constant current micro-arc oxidation.
为了提高钛合金基体与Fe(吸波剂)/环氧涂层的结合强度,采用微弧氧化在钛合金表面制备一定厚度的二氧化钛多孔膜,之后浸涂Fe/环氧树脂涂料。
5)  epoxy coatings
环氧涂层
1.
Electrochemical impedance spectroscopy of multi-layer epoxy coatings in NaCl solution;
多道环氧涂层在NaCl溶液中的电化学阻抗谱
2.
The influence of size of mica fillers(124 μm, 38 μm and 19 μm) on diffusion of water in epoxy coatings was studied by use of electrochemical impedance spectroscopy and weightings methods.
以3种不同尺寸(124μm、38μm和19μm)的片状云母粉为填料,应用质量法和电化学阻抗法(EIS)研究云母填料尺寸效应对水在环氧涂层中的扩散行为的影响。
3.
The diffusing behavior of water through epoxy coatings with different pigment volume concentration(PVC) has been studied by electrochemical impedance spectroscopy(EIS).
利用电化学阻抗谱技术 ,研究了H2 O在不同颜料体积浓度 (PVC)环氧涂层中的传输行为 ,计算出H2 O在不同PVC环氧涂层中的扩散系数 ,并分析了PVC对H2 O在环氧涂层中传输行为的影响 。
6)  liquid epoxy
液体环氧
1.
In the gas transportation pipeline construction at Guandong LNG Station, the technique of using liquid epoxy for 3PE anticorrosion pipeline field joints was applied for trial for the first time in our country.
在国内输气管道——广东LNG站线项目首次引进试用了目前国际上最新的3PE管道液体环氧补口技术。
2.
Comparison and analysis are carried out to the schemes of rush repair with heat shrinkable tape and bicomponent new-type liquid epoxy.
在管道定向钻穿越的回拖过程中,针对抢修聚乙烯涂层的连续性长距离严重划伤问题,对比分析了热缩带修补方案和新型双组分液体环氧涂料修补方案,结果表明,在材料成本、抢修时间、使用效果等方面,新型双组分液体环氧涂料方案均优于热缩带修补方案。
补充资料:双(2,3-环氧环戊基)醚玻璃布层合板
分子式:
CAS号:

性质:以双(2,3-环氧环戊基)醚为基料的层合板。马丁耐热270℃。拉伸强度371MPa。弯曲强度487MPa。冲击强度125kJ/m2。体积电阻率l.18×1015Ω·cm。将双(2,3-环氧环戊基)醚与固化剂等制成胶液或B阶树脂后,充分浸渍玻璃布,再叠层并层合即得。主要用作航空航天器材、电子元件和体育器材等。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条