1) WEDG
线电极放电磨削
1.
Starting from choose the working liquid,the analysis explained that wire electrical discharge grinding(WEDG) method can reduces the surface roughness value(Ra) of project ceramics gyration surface in this paper.
通过实验分析说明,采用混粉工作液进行线电极放电磨削碳化硼陶瓷回转表面,可降低加工表面粗糙度值。
2) linear motor
直线电机
1.
Optimization design of parameters in feeding system driven by linear motor based on APDL;
基于APDL的直线电机进给驱动平台的参数优化设计
2.
Study on the new pumping unit driven by linear motor;
直线电机驱动抽油机的试验研究
3.
Application of linear motor to numerically controlled machine tool and the prospect;
直线电机在数控机床进给系统中应用现状与趋势
3) wire electrode
线电极
1.
Design of the Tension Measuring Mechanism for Wire Electrode;
线电极张力检测机构设计
2.
Based on electrochemical etching principle,the micrometer scale wire electrode was online fabricated,and the equipment of WEMM was established.
基于电化学原理,讨论了纳秒脉冲电流微细电解线切割加工的机理,建立了微细电解线切割加工数学模型;采用电化学腐蚀原理对微米尺度线电极进行在线制作,建立了微细电解线切割加工试验系统,并进行了微细电解线切割加工试验,切割出带90°直角的微结构,其切缝宽度为30μm。
3.
Wire Electrical Discharge Machining Milling (Wire EDM-Milling) is a novel kind of EDM-Milling method that has the distinct advantage of electrode compensation via the wire electrode slow traveling.
线电极放电铣削加工是一种新型电火花铣削技术,它的最大优点是可通过线电极的缓慢移动来补偿加工中的电极损耗。
4) radio station
无线电台
1.
Comprehensive parameter safety monitoring and control system of mine ventilation shaft base on DSP radio station;
基于DSP无线电台风井综合参数安全监控系统
2.
Brief instruction for installing radio station antenna at the support of hydrology cableway;
水文缆道支架上架设无线电台天线方法简介
3.
communications between tow water sources depand on broadband network and the second water source collects siganals in field via radio station,in this way,the system s’ stability and usability could be enhanced.
两水源之间采用宽带网络进行通讯,二水源通过无线电台进行野外信号采集,这样能够增强系统的稳定性与实用性。
5) wire and cable
电线电缆
1.
Exploration on the study of wire and cable flammability by using cone calorimeter;
锥形量热计法研究电线电缆燃烧性能的探讨
2.
Insulating materials for spacecraft wire and cable;
空间飞行器用电线电缆绝缘材料
3.
Status-quo and tendency of development of the irradiation process of wire and cable in China;
我国电线电缆辐射加工应用现状及发展趋势
6) linear motors
直线电机
1.
Research on the DSP-based control strategies of a positioning servo system of the linear motors;
基于DSP的直线电机位置伺服控制策略研究
2.
A synchro control technology is presented, and applies dual linear motors as traversing drive mechanism of gantries to gantry -moving high speed milling machines.
提出一种同步控制技术 ,将两个直线电机应用到龙门移动式高速镗铣床中 ,用直线电机带动龙门柱实现纵向进给 ,通过同步控制技术使两个龙门柱保持同步。
参考词条
补充资料：无电极放电管(electrodeless discharge tube)
分子式：
CAS号：
性质：又称无电极放电管(electrodeless discharge tube)。原子荧光光谱分析中用的高强度无极放电光源。密封充有惰性气体的石英管，内置高纯待测元素的卤化物。用2450MHz微波激发发光，其发光强度比空心阴极光源强数百倍。
CAS号：
性质：又称无电极放电管(electrodeless discharge tube)。原子荧光光谱分析中用的高强度无极放电光源。密封充有惰性气体的石英管，内置高纯待测元素的卤化物。用2450MHz微波激发发光，其发光强度比空心阴极光源强数百倍。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。