说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 脉冲阳极电沉积
1)  Pulse anodic electrolysis deposition
脉冲阳极电沉积
2)  anodic electrodeposition
阳极电沉积
1.
The electrodes with γ-MnO2 type oxide coatings were prepared by anodic electrodeposition on the base of Ti/IrO2.
采用阳极电沉积法在Ti/IrO2基体上获得γ-MnO2氧化物涂层钛电极,在镀液中掺杂其他元素进行阳极电沉积,获得了MnV、MnCr、MnMoFe和MnFeV混合氧化物涂层钛电极。
3)  pulse electrodeposition
脉冲电沉积
1.
Process of pulse electrodeposition of nanocrystalline Ni-Cr alloy from trivalent chromium bath;
三价铬脉冲电沉积纳米晶Ni-Cr合金工艺
2.
Pt-Ru-La/C electrocatalyst for DMFC prepared by pulse electrodeposition;
脉冲电沉积法制备DMFC用Pt-Ru-La/C电催化剂
3.
Cobalt/platinum multilayer prepared by pulse electrodeposition in a single cell and its characterization;
单槽脉冲电沉积制备钴/铂多层膜及其性能表征
4)  electro-pulse deposition
电脉冲沉积
1.
High temperature corrosion behavior of microcrystalline aluminide coatings by electro-pulse deposition;
电脉冲沉积铝化物微晶涂层的高温腐蚀行为
5)  pulse current electrodeposition
脉冲电沉积
1.
A nanostructured nickel alloy and a Ni/Si3N4(w) composite were fabricated by pulse current electrodeposition,and their superplastic tensile deformation behaviors were investigated at strain rates ranging from 1×10?3 to 2×10?2 s?1 and temperatures ranging from 673 to 823 K.
采用脉冲电沉积技术制备纳米镍合金及Ni/Si3N4(w)复合材料,在应变速率为1×10-3~2×10-2 s-1,温度为673~823 K的条件下,研究它们的超塑性拉伸变形行为,确定最佳超塑性条件并获得最大伸长率。
6)  pulse plating
脉冲电沉积
1.
Based on study on the influence of solution composition and pulse parameters, namely, pulse on-time, off-time and peak current density on deposition layer in the pulse plating process, desirable diamond tools are easily obtained by using the alternating pulse deposition.
课题主要研究了脉冲电沉积法制备纳米镍钴材料的制备工艺及所制备材料的性能,并对该技术如何应用在金刚石工具进行了研究。
2.
,metal Cu nanocrystalline layers were plated on the surface of metal substrates by pulse plating,then the Cu nanocrystalline layers were used to synthesize CuO nanoneedles by thermal oxidation method at 700℃ in the air.
采用脉冲电沉积技术在金属 Cu 基板表面电沉积纳米晶 Cu 薄膜,在空气中采用热氧化法制备出一维金属 CuO 纳米针材料。
补充资料:阳极电沉积涂料
分子式:
CAS号:

性质:又称阳极电沉积涂料,指以被涂物为阳极,用水性阴离子树脂作电泳涂装的涂料。其主要品种有顺酐化油、环氧酯顺酐加成物、聚丁二烯顺酐加成物,偏苯三酸酐高酸值氨基醇酸系树脂、高酸值氨基丙烯酸系树脂等为基料配制的电泳漆。前三者主要用作金属底漆,后两者主要用作金属装饰面漆。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条