1) iron-aluminide and alumina composite coating
Fe-Al/Al2O3复合涂层
2) Al2O3/Al coatings
Al2O3/Al复合涂层
1.
The results indicate that Reactive Magnetron Sputtered Al2O3/Al coatings appear no obvious corrosion compared to the serious spallation of Plasma Sprayed Al2O3/Al coatings.
采用盐雾腐蚀和磨损试验考核,结合SEM/EDS和XRD表征,分析了贫铀表面Al2O3/Al复合涂层的保护性能。
3) Al/Al_2O_3 composite coatings
Al/Al2O3复合涂层
1.
The polarization curves of magnesium alloy and Al/Al_2O_3 composite coatings were examined by electrochemical test,respectively.
采用等离子喷涂技术在AZ31镁合金表面制备Al/Al2O3复合涂层,测试了镁合金及表面喷涂有Al/Al2O3复合涂层的镁合金试样的极化曲线,研究了没有涂层、经封孔处理和未经封孔处理的喷涂有复合涂层的镁合金三种试样在浸泡腐蚀和5%NaCl盐雾腐蚀情况下的耐腐蚀性能及其腐蚀行为。
4) Fe-Al/SiC composite coating
Fe-Al/SiC复合涂层
1.
Fe-Al/SiC composite coating was made by HVFS.
利用高速火焰喷涂技术制备出Fe-Al/SiC复合涂层,在MM-A1立式磨损试验机上对涂层常温下的摩擦磨损特性进行研究。
2.
It indicated that the matrix of Fe-Al/SiC composite coating was Fe-Al phase (Fe3Al,FeAl) and SiC hard phase distributed all over the coating, and the coating displayed the typical layers structure characteristics.
采用高速火焰喷涂技术制备了Fe-Al/SiC复合涂层,对涂层在650℃下的热腐蚀动力学规律进行了研究,并利用扫描电镜(SEM)、能谱仪(EDS)和X射线衍射仪(XRD)对涂层及腐蚀产物的成分和形貌进行分析。
3.
In order to solve the hot corrosion problem on the water-wall tubes in thermal power plants, HVFS technology was used to prepare the Fe-Al/SiC composite coating, and the bonding strength, micro hardness, thermal shock and hot corrosive resistance performance of the coating were studied.
为解决火电厂锅炉水冷壁热腐蚀问题,采用高速火焰喷涂技术首次制备出Fe-Al/SiC复合涂层,并对涂层的结合强度、显微硬度、抗热震性能和耐热腐蚀性能进行了研究。
5) Fe-Al/Cr_3C_2 composite coating
Fe-Al/Cr3C2复合涂层
补充资料：Au-Pd-Cr-Pt-Fe-Al-Y alloys
分子式：
CAS号：
性质：金基与钯、铬、铂、铁、铝和钇的多元合金，电阻系数最高。生产方法参见金钯铬合金。可用作高温应变材料。
CAS号：
性质：金基与钯、铬、铂、铁、铝和钇的多元合金，电阻系数最高。生产方法参见金钯铬合金。可用作高温应变材料。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条