说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 常温耐磨性能
1)  Abrasion resistance at room temperature
常温耐磨性能
2)  wear resistance
耐磨性能
1.
Investigations of wear resistance after Supersonic Particles Bombarding in Cr-Zr-Cu surface;
超音速颗粒轰击铬锆铜表面耐磨性能的研究
2.
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
3.
Microstructure and wear resistance of laser clad TiC+Ti and TiC+NiCrBSi composite layers on Ti-6Al-4V alloy;
TC4钛合金激光熔覆TiC+M涂层组织和耐磨性能研究
3)  abrasion resistance
耐磨性能
1.
Improving abrasion resistance of tread compound with zinc oxide whiscker;
氧化锌晶须改善轮胎胎面胶耐磨性能的研究
2.
The results show that the abrasion resistance and compressive property of PTFE/GF increase markedly after irradiating.
结果表明,经电子束辐射后,PTFE/GF的耐磨性能和压缩性能均显著提高。
4)  wear-resistance
耐磨性能
1.
In order to improve wear-resistance of the sucker rod,20CrMo was used as material of experiment samples,alloy and graphite powders were used as material of the layer,an acetylene blowtorch of thermal spray apparatus was used to apply a wear-resistance layer to 20CrMo surface.
为提高抽油杆的表面耐磨性能,选用20CrMo作为试样材料,采用合金加石墨混合粉末作为涂层原材料,利用氧乙炔热喷涂装置,在20CrMo试样表面上制备出耐磨涂层。
2.
A wear-resistance microstructure.
结果表明:随着Fe含量增加,Al-Fe复合材料的孔隙率增高,抗拉强度先升后降,伸长率下降,硬度和耐磨性增高,对偶件的减摩性能下降;Al-10%Fe和Al-20%Fe的耐磨性能分别为QSn6。
3.
The effects of rare-earth oxide CeO2 on the microstructure and microhardness and wear-resistance and corrosion-resistance of Ni-based metal-ceramic coatings were investigated.
采用CO2横流激光器在45#钢基体表面熔覆添加不同含量的稀土氧化物CeO2的镍基TiC金属陶瓷复合层;对熔覆层进行了显微组织观察、显微硬度测量、耐磨性能和耐腐蚀性能测试。
5)  wear-resisting property
耐磨性能
1.
Microstructure and wear-resisting property of TiC particle reinforced coatings claded by TIG welding with multiple layer;
多层氩弧熔敷含TiC颗粒增强涂层的微观组织及耐磨性能
2.
A comparative study on wear-resisting property of Polypropylene monofilaments for fishing gear;
聚丙烯单丝耐磨性能的比较研究
3.
The influence of the tempering temperature on hardness and wear-resisting property of hardfacing metal had been discussed.
研制出了氮碳合金化自保护硬面药芯焊丝,探讨了回火温度对氮碳合金化自保护硬面药芯焊丝堆焊层硬度和耐磨性能的影响。
6)  wearability [英][,wɛərə'biliti]  [美][,wɛrə'bɪlətɪ]
耐磨性能
1.
The abrasive parts made of polyurethane for making ceramic powder possesses excellent wearability and long life which make no contamination, low noise and save energy.
用聚氨酯制造电子陶瓷粉料过程中的各种耐磨件,耐磨性能好,使用寿命长,不污染物料,节能降噪,使用方便,物美价廉。
2.
The high temperature wearability and the mechanism of wearing-resistance of carbon fiber reinforced SiC/phenolic aldehyde sintered alloy were studied and discussed.
对碳纤维增强SiC/酚醛树脂烧结合金的高温耐磨性能及其耐磨机理进行了详细研究。
3.
It has the characteristics of light weight,good wet -proof behaviour and wearability,high usable frequency.
它具有重量轻、抗湿性能好、耐磨性能好、使用率高、便于施工和保证混凝土表面质量等特点。
补充资料:不锈钢的物理性能、力学性能和耐热性能
不锈钢的物理性能


不锈钢和碳钢的物理性能数据对比,碳钢的密度略高于铁素体和马氏体型不锈钢,而略低于奥氏体型不锈钢;电阻率按碳钢、铁素体型、马氏体型和奥氏体型不锈钢排序递增;线膨胀系数大小的排序也类似,奥氏体型不锈钢最高而碳钢最小;碳钢、铁素体型和马氏体型不锈钢有磁性,奥氏体型不锈钢无磁性,但其冷加工硬化生成成氏体相变时将会产生磁性,可用热处理方法来消除这种马氏体组织而恢复其无磁性。

奥氏体型不锈钢与碳钢相比,具有下列特点:

1)高的电阴率,约为碳钢的5倍。

2)大的线膨胀系数,比碳钢大40%,并随着温度的升高,线膨胀系数的数值也相应地提高。

3)低的热导率,约为碳钢的1/3。

不锈钢的力学性

不论不锈钢板还是耐热钢板,奥氏体型的钢板的综合性能最好,既有足够的强度,又有极好的塑性同时硬度也不高,这也是它们被广泛采用的原因之一。奥氏体型不锈钢同绝大多数的其它金属材料相似,其抗拉强度、屈服强度和硬度,随着温度的降低而提高;塑性则随着温度降低而减小。其抗拉强度在温度15~80°C范围内增长是较为均匀的。更重要的是:随着温度的降低,其冲击韧度减少缓慢,并不存在脆性转变温度。所以不锈钢在低温时能保持足够的塑性和韧性。

不锈钢的耐热性能

耐热性能是指高温下,既有抗氧化或耐气体介质腐蚀的性能即热稳定性,同时在高温时双有足够的强度即热强性。

不锈钢国际标准标准

标准 标准名


GB 中华人民共和国国家标准(国家技术监督局)

KS 韩国工业标准协会规格Korean Standard

AISI 美国钢铁协会规格America Iron and Steel Institute

SAE 美国汽车技术者协会规格Society of Automative Engineers

ASTM 美国材料试验协会规格American Society for Testing and Material

AWS 美国焊接协会规格American Welding Society

ASME 美国机械技术者协会规格American Society of Mechanical Engineers

BS 英国标准规格British Standard

DIN 德国标准规格Deutsch Industria Normen

CAS 加拿大标准规格Canadian Standard Associatoin

API 美国石油协会规格American Petroleum Association

KR 韩国船舶协会规格Korean Resister of Shipping

NK 日本省事协会规格Hihon Kanji Koki

LR 英国船舶协会规格Llouds Register of Shipping
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条