说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 热浸锌镀层
1)  hot-dip galvanized coating
热浸锌镀层
1.
The types of hot-dip galvanized coatings and the effects of alloy elements on the structure and performance of hot-dip galvanized coatings are introduced.
本文综述了热浸锌镀层材料及合金元素对镀层性能的影响,并对各种锌镀层结构及性能进行了阐述。
2)  hot-dip galvanizing
热浸镀锌
1.
Development of formulation on acid pickling of steel welded joint before hot-dip galvanizing;
钢材及焊接接头表面热浸镀锌前酸洗液配方研制
2.
Analysis and control of zinc consumption in hot-dip galvanizing process for iron and steel workpiece;
钢铁制件热浸镀锌的锌耗分析与控制
3.
Research progress on hot-dip galvanizing of evaporative condenser coils;
蒸发式冷凝器盘管热浸镀锌研究进展
3)  Hot dip galvanization
热浸镀锌
1.
Hot dip galvanization is the present widespread application used in anticorrosion for zinc coating W-beams barriers.
热浸镀锌工艺目前广泛应用于高速公路波形梁钢护栏防腐处理。
4)  hot dip galvanizing
热浸镀锌
1.
This article reviews the influence of surface properties of silicon containing steels on the reactivity of hot dip galvanizing reaction.
综述了含硅钢材表面状态因素对热浸镀锌反应活性的影响,这些因素包括亚表面氧化、表面粗糙度、表面残余应力、表面晶粒位向及表面组织结构等。
2.
A Zn-Ni-Bi bath for hot dip galvanizing of reactive steels is better than that of the traditional zinc bath or Zn-Ni alloy bath;the addition of Sn to the galvanizing bath can retard the excessive growth of the zinc-iron alloy layer on reactive steel (>0.
综述了国内外关于热浸镀锌合金技术的最新发展。
3.
A new type vertical structure hot dip galvanizing simulator was developed,its design principle and structure was introduced.
该试验机由熔锌炉、气刀、红外线加热炉、隔离密封装置以及电气、液压控制系统及数据采集与输出等几部分组成 ,主要用于在实验室条件下 ,研究钢板热浸镀锌的控制条件和过
5)  hot-dip galvanization
热浸镀锌
1.
Zn-Ni alloy can reduce Sandelin effect when used in hot-dip galvanization of silicon containing reactive steel.
锌镍合金用于热浸镀锌,能很好地解决含硅活性钢热浸镀时的圣德林效应。
6)  hot galvanizing
热浸镀锌
1.
The writer analyzes in detail various factors to threaten the hot galvanizing quality of steel stands and supports of the cableway upon some engineering practices,and emphasizes the dynamic control methods used in every stage of hot galvanizing process for reference by other similar projects.
笔者通过具体工程实例,详细分析了影响索道钢支架支柱热浸镀锌质量的各种因素,着重阐述了热浸镀锌过程中的各阶段动态控制的方法,可供类似工程借鉴、参考。
补充资料:热浸渗铝镀层
分子式:
CAS号:

性质:用热浸镀方法在钢表面形成的镀铝层。钢件浸入700~730℃的熔融铝液中,表面生成铝铁化合物,同时一部分铝原子渗入钢铁基体形成扩散层。为使镀层与基体金属牢固结合,一般在热浸后还要进行一次900~980℃的高温处理,使镀层软熔扩散,形成合金层。镀层具有优良的耐大气腐蚀性、抗高温氧化性和抗高温硫腐蚀性能。在石油、化工、能源、海洋工程等领域广泛应用。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条