说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 常规PID控制器
1)  general PID controller
常规PID控制器
1.
The simulation indicates that this controller s quality is better than general PID controller in aspect .
仿真结果表明,该控制器在控制量品质、动态性能、稳态精度等方面都优于常规PID控制器
2)  regulatory PID control
常规PID控制
1.
The bed temperature primary control system of 450t/h CFBB in Baoding Cogeneration Power Plant is regulatory PID control,to solve the problem of slowly responding,frequently operation of actuator,biggish abrasion,this paper proposes the fuzzy self-tuning PID technique,this method can rectify online factors.
保定热电厂450t/hCFBB(循环流化床锅炉)的原床温控制系统采用的是常规PID控制,针对原系统响应慢、执行器动作频繁、磨损较大的问题,本文提出采用模糊自整定PID技术,该方法可将影响床温的工况参数与PID控制器参数相结合,建立模糊粗调机制,然后根据实际的系统误差及其变化率对PID控制器参数进行微调。
3)  conventional PID control
常规PID控制
1.
About the design of control algorithm, the system must be meet the requirement of high precision and low-speed, so conventional PID control algorithm can not reach satisfactory results.
在单轴气浮转台控制算法研究上,针对单轴气浮台测控系统的高精度和低速度要求,常规PID控制在此转台控制中无法达到满意的控制效果,本文提出了一种基于反向传播神经网络复合闭环的智能PID控制算法。
2.
Second, referencing the automation control theory, the author established the conventional PID control mathematical model of canal-pipes conjunctive system, studied the PID control process in condition of different flow variation and different governing speed of gate.
在此基础上,引入自动控制理论,建立了管渠结合系统输水运行常规PID控制数学模型,对不同流量变化量和不同闸门调节速度下的PID控制过程进行了研究。
4)  routine PID control
常规PID控制
1.
This thesis chiefly studies the temperature control system by way of simulation, including routine PID control, fuzzy control and adaptive parameters control.
文章介绍了过程控制系统中常用的PID控制,利用仿真软件MATLAB得到了系统的响应曲线,针对常规PID控制参数整定困难、无法克服超调而造成能源浪费的问题,文章设计了模糊控制器,通过理论分析和仿真实验证明,模糊控制实时性强,系统的动态响应超调小,具有较高的实用价值。
5)  rule PID controller
规则PID控制器
6)  Common controller
常规控制器
补充资料:离散PID控制算法
分子式:
CAS号:

性质:在用计算机等作为控制装置进行数字控制时实现PID控制作用的数学表示式。在数字控制中,控制装置只取各个采样时刻的输入变量值进行运算,如偏差值e(k)为第k个采样时刻的设定值r(k)与被控变量测量值y(k)的差值。离散PID控制有位置算法、增量算法与速度算法三种形式。(1)位置算法直接给出各采样时刻的控制作用量2J(是),具体算法是:式中,Kc为比例增益,Ti为再调时间,Td为预调时间,Δt为采样周期。这里用叠加代替积分,差分代替微分。位置算法的输出可直接送往数字式执行器,或经数字/模拟转换送往模拟式执行器,并须用保持器将该信号保持到下一次采样为止。在手动一自动切换和防止积分饱和问题上,位置算法不像另两类算法那样方便。(2)增量算法给出每个采样时刻控制装置输出应改变的数值Δu(k),即第k个采样时刻的控制作用量u(k)与前一采样时刻的控制作用量u(k-1)之间的差值,具体算法是: 增量算法的输出一般通过步进电机等累积机构,化为模拟量,操纵控制阀。该种算法具有手动一自动切换方便,和避免引起积分饱和等优点,应用最广。(3)速度算法给出在各个采样时刻控制装置输出应采取的变化速v(k),该速度用Δu(k)/Δt近似表示,具体算式为:速度算法的输出应送往积分式执行机构。速度算法也有手动一自动切换方便和避免引起积分饱和的优点。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条